iPXE discussion forum / iPXE user forums / General v / Why Esxi 6.5 or 6.7 fail to start setup GUI via iPXE

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Why Esxi 6.5 or 6.7 fail to start setup GUI via iPXE
2019-12-12, 01:19
Post: #10
hugogong Offline
iPXE User
**
 		Posts: 29
Joined: 2019-Dec
Reputation: 0
RE: Why Esxi 6.5 or 6.7 fail to start setup GUI via iPXE
Anyway, not to consider how to use ipxe.pxe instead of ipxe.efi. This thread is intended to ask how Esxi failed to install via iPXE in UEFI BIOS mode? Smile

I tried kernel or chain. neither of them is fine.
1. kernel http://myserver/vmware/esxi_6.5.1/efi/boot/mboot.efi -c http://myserver/vmware/esxi_6.5.1/boot.cfg
boot
2. chain http://myserver/vmware/esxi_6.5.1/efi/boot/mboot.efi -c http://myserver/vmware/esxi_6.5.1/boot.cfg
boot

It is fine if I use chain in grub via PXE.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Why Esxi 6.5 or 6.7 fail to start setup GUI via iPXE - hugogong - 2019-12-12 01:19



User(s) browsing this thread: 2 Guest(s)

Contact Us | iPXE home page | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication