chainloading (undionly.kpxe) ipxe is failing.

[vpnchoudhary]

(2019-12-12 21:19)NiKiZe Wrote:  I will again suggest that you use ctrl+b and run dhcp manually
Follow that with ifstat and check if you have any packages sent.

You can then follow that with config, and check that you have proper filename (and maybe next-server as well if filename don't include protocol)

Seems like once undionly is loaded into memory the network stack stop working. dhcp command was working before loading undionly but it stop working after loading undionly. Refer the screenshot. Used ctrl + b to break into shell cmd and then manually chainloaded undionly. https://1drv.ms/u/s!AnspKd67W4R2ghtQ0ytgIZYMGcNZ