Booting ipxe from usb causes megaraid_sas driver to fail
|
2019-12-16, 14:46
Post: #1
|
|||
|
|||
Booting ipxe from usb causes megaraid_sas driver to fail
We have an existing setup using the Broadcom Nics' pxe fw to chainload ipxe, then our image (devuan ascii/beowulf). It works as expected.
Our new setup has ipxe on usb, and it loads the same image via ipv6/dhcpv6 but during boot it gets stuck at: Probing EDD (edd=off to disable) If we supply edd=off to kernel boot parameters it succesfully boots but the H800 (hwraid card) becomes unusable and it produces an error in dmesg (1). We have tried: newer(4.19.0-6)/older kernel(4.9.0-11), recompiling ipxe/initramfs multiple times, boot uefi usb ipxe, upgrading bios/h800 fw, different hosts: dell (intel)r710/(amd)r815, multiple h800 cards We have ran out of ideas, could somebody give us direction and pointers how can we solve this / where to continue debugging? (1): (it appears at lscpi) root@devuan:~# lspci | grep -i raid 05:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS 2108 [Liberator] (rev 05) 06:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS 2108 [Liberator] (rev 05) hung of udevd: [ 243.007077] Call Trace: [ 243.007962] [<ffffffffbb817609>] ? __schedule+0x239/0x6f0 [ 243.008821] [<ffffffffbb817af2>] ? schedule+0x32/0x80 [ 243.009642] [<ffffffffbb81ae8d>] ? schedule_timeout+0x1dd/0x380 [ 243.010426] [<ffffffffbb818531>] ? wait_for_completion+0xf1/0x130 [ 243.011209] [<ffffffffbb2a60e0>] ? wake_up_q+0x70/0x70 [ 243.011985] [<ffffffffbb2956fe>] ? flush_work+0x10e/0x1c0 [ 243.012744] [<ffffffffbb291cb0>] ? destroy_worker+0x80/0x80 [ 243.013490] [<ffffffffbb295821>] ? work_on_cpu+0x71/0x90 [ 243.014227] [<ffffffffbb2915e0>] ? __usermodehelper_disable+0x130/0x130 [ 243.014960] [<ffffffffbb584070>] ? pci_device_shutdown+0x60/0x60 [ 243.015679] [<ffffffffbb5854e3>] ? pci_device_probe+0xf3/0x160 [ 243.016387] [<ffffffffbb6853f2>] ? driver_probe_device+0xe2/0x420 [ 243.017088] [<ffffffffbb68580d>] ? __driver_attach+0xdd/0xe0 [ 243.017800] [<ffffffffbb685730>] ? driver_probe_device+0x420/0x420 [ 243.018527] [<ffffffffbb683069>] ? bus_for_each_dev+0x69/0xb0 [ 243.019266] [<ffffffffbb68476a>] ? bus_add_driver+0x16a/0x260 [ 243.020021] [<ffffffffc0588000>] ? 0xffffffffc0588000 [ 243.020770] [<ffffffffbb6860b7>] ? driver_register+0x57/0xc0 [ 243.021515] [<ffffffffc0588000>] ? 0xffffffffc0588000 [ 243.022258] [<ffffffffc05880bf>] ? megasas_init+0xbf/0x1000 [megaraid_sas] [ 243.023016] [<ffffffffbb20218e>] ? do_one_initcall+0x4e/0x180 [ 243.023794] [<ffffffffbb3ccb96>] ? __vunmap+0x76/0xc0 [ 243.024576] [<ffffffffbb382153>] ? do_init_module+0x5b/0x1f6 [ 243.025372] [<ffffffffbb305466>] ? load_module+0x25b6/0x2ac0 [ 243.026180] [<ffffffffbb301b90>] ? __symbol_put+0x60/0x60 [ 243.027001] [<ffffffffbb305bb6>] ? SYSC_finit_module+0xc6/0xf0 [ 243.027845] [<ffffffffbb203b7d>] ? do_syscall_64+0x8d/0x100 [ 243.028688] [<ffffffffbb81c3ce>] ? entry_SYSCALL_64_after_swapgs+0x58/0xc6 ... [ 259.458677] megaraid_sas 0000:05:00.0: Failed to init firmware ... [ 259.459989] Workqueue: events work_for_cpu_fn [ 259.460013] 0000000000000000 ffffffffbb5353d4 ffffbcc64d703c30 0000000000000000 [ 259.460059] ffffffffbb27a83b 0000000000000032 ffffbcc64d703c88 ffff9efb8802c200 [ 259.460104] 0000000000000032 ffff9efb8802c2d4 0000000000000246 ffffffffbb27a8bf [ 259.460150] Call Trace: [ 259.460171] [<ffffffffbb5353d4>] ? dump_stack+0x5c/0x78 [ 259.460198] [<ffffffffbb27a83b>] ? __warn+0xcb/0xf0 [ 259.460223] [<ffffffffbb27a8bf>] ? warn_slowpath_fmt+0x5f/0x80 [ 259.460265] [<ffffffffc056c9c8>] ? megasas_free_cmds+0x48/0x70 [megaraid_sas] [ 259.460301] [<ffffffffbb2d6fe2>] ? __free_irq+0xa2/0x280 [ 259.460327] [<ffffffffbb2d7247>] ? free_irq+0x37/0x90 [ 259.460357] [<ffffffffc0566285>] ? megasas_destroy_irqs+0x45/0x80 [megaraid_sas] [ 259.460397] [<ffffffffc0570915>] ? megasas_probe_one+0xa05/0x1d30 [megaraid_sas] [ 259.460434] [<ffffffffbb29a9e2>] ? __kthread_create_on_node+0x132/0x180 [ 259.460468] [<ffffffffbb2b0dd3>] ? check_preempt_wakeup+0x103/0x210 [ 259.460501] [<ffffffffbb5840b4>] ? local_pci_probe+0x44/0xa0 [ 259.460529] [<ffffffffbb2915f6>] ? work_for_cpu_fn+0x16/0x20 [ 259.460557] [<ffffffffbb29486a>] ? process_one_work+0x18a/0x430 [ 259.460587] [<ffffffffbb294cda>] ? worker_thread+0x1ca/0x490 [ 259.460615] [<ffffffffbb294b10>] ? process_one_work+0x430/0x430 [ 259.460645] [<ffffffffbb29abc9>] ? kthread+0xd9/0xf0 [ 259.460671] [<ffffffffbb29aaf0>] ? kthread_park+0x60/0x60 [ 259.460700] [<ffffffffbb81c564>] ? ret_from_fork+0x44/0x70 [ 259.460728] ---[ end trace 7cb7858013a2460a ]--- Linux devuan 4.9.0-11-amd64 #1 SMP Debian 4.9.189-3 (2019-09-02) x86_64 GNU/Linux |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
Booting ipxe from usb causes megaraid_sas driver to fail - llnu - 2019-12-16 14:46
RE: Booting ipxe from usb causes megaraid_sas driver to fail - NiKiZe - 2019-12-18, 16:36
|
User(s) browsing this thread: 1 Guest(s)