[solved] [renamed] DHCP timeout from Realtek 8139 card

[Gelip]

Guys, I have good news !!! mcb30 make some patch's mdelay, iodelay and new readw. All patch's working but official commit readw

Link commitdiff: [realtek] Allow reaction time between writing RTL_CAPR and reading RTL_CR

So I thought no matter what the media run iPXE. This is DEBUG=realtek (level 1)

Code:

REALTEK 0xbeea0 appears to be an RTL8139
REALTEK 0xbeea0 EEPROM is a 93C46
REALTEK 0xbeea0 EEPROM ID incorrect (0x0129); assuming no EEPROM
REALTEK 0xbeea0 media status is 10
ok



iPXE 1.0.0+ (e411) -- Open Source Network Boot Firmware -- http://ipxe.org
Features: AoE HTTP iSCSI DNS TFTP SRP bzImage ELF MBOOT PXE PXEXT Menu
REALTEK 0xbeea0 receive buffer is at [1fe03eb0,1fe05eb0,1fe066a6)
REALTEK 0xbeea0 media status is 10
DHCP (net0 00:80:48:1c:cd:59)....... ok
menu.ipxe... ok

P.S. To resolve problem display wrong message in DEBUG=realtek:

Code:

REALTEK 0xbeea0 EEPROM ID incorrect (0x0129); assuming no EEPROM

need apply other patch:

Link commitdiff: [realtek] Ensure EEPROM writes reach chip before starting udelay()