iPXE discussion forum / iPXE user forums / General v / HP 2570p (no network with iPXE undionly.kpxe) but ipxe.lkrn is working.

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
HP 2570p (no network with iPXE undionly.kpxe) but ipxe.lkrn is working.
2013-01-29, 13:05
Post: #11
robinsmidsrod Offline
iPXE forum administrator
*******
 		Posts: 941
Joined: 2011-Apr
Reputation: 15
RE: HP 2570p (no network with iPXE undionly.kpxe) but ipxe.lkrn is working.
@shayco: No, you can't use the UNDI driver when booting from CD or USB, because it is dependent on the vendor-provided PXE bootloader having already been started. When you boot from CD or USB that never happens.

If you use ipxe.iso/ipxe.usb you're using iPXE-provided drivers for your hardware. If there is a driver for your hardware it "Should Work". If you already have the iPXE source code available, you can run src/util/niclist.pl to get a list of all supported network adapters. USB-based adapters are not supported because we don't have a generic USB driver stack.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: HP 2570p (no network with iPXE undionly.kpxe) but ipxe.lkrn is working. - robinsmidsrod - 2013-01-29 13:05



User(s) browsing this thread: 1 Guest(s)

Contact Us | iPXE home page | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication