[SOLVED] : iPXE and WDS Config

[Sedorox]

For what it's worth, if it's what you are trying to do, you can have iPXE boot directly to a WDS server, that is not the TFTP server. Here is the code I've used successfully (as a iPXE script):

Code:

set wdsserver:ipv4 10.0.3.99
set net0/next-server ${wdsserver}
chain tftp://${wdsserver}/boot%5Cx86%5cwdsnbp.com

Notice that the TFTP path uses the windows directory delimiter, \... so with iPXE, this is done as hex. I found this out via a screenshot from http://ipxe.org/howto/wds_iscsi .