iPXE discussion forum / iPXE user forums / General v / Pre-installed Win7 x64 boot to ramdisk via iPXE

Post Reply 
 
Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Pre-installed Win7 x64 boot to ramdisk via iPXE
2013-02-18, 07:08 (This post was last modified: 2013-02-18 07:09 by Robbin.)
Post: #3
Robbin Offline
iPXE User
**
 		Posts: 4
Joined: 2013-Feb
Reputation: 0
RE: Pre-installed Win7 x64 boot to ramdisk via iPXE
Thanks for reply.
Yes I'm absolutely sure that DirectX will not work in WinPE.

Im not stuck with .wim, I can use any extension and file format.
Maybe my goal is achievable with Windows Embedded 7 Standard? But it seems too similiar to normal Windows 7.

Also I've got a suggestion from Russian forums:
Install Windows 7 on a partition, install Firadisk driver, configure Windows 7, save the partition as .vhd, then use TeraByte Unlimited, Acronis or Paragon software via network that will download and boot the image of system.

What do you think of this scenario?
Thanks.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Pre-installed Win7 x64 boot to ramdisk via iPXE - Robbin - 2013-02-18 07:08



User(s) browsing this thread: 1 Guest(s)

Contact Us | iPXE home page | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication