The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 807 - File: showthread.php PHP 7.3.15 (Linux)
File Line Function
/showthread.php 807 errorHandler->error

Post Reply 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
iPXE hangs on boot from pxelinux at first Ctrl-B
2013-04-14, 22:59 (This post was last modified: 2013-04-14 23:42 by Gelip.)
Post: #1
iPXE hangs on boot from pxelinux at first Ctrl-B
I build iPXE 10110009.rom for VPC 2007 & 10222000.rom for VMware pcnet32. Next inserted this to BINRES 13502 (VPC) & 6010 (VMware). Now test it with PXE server: TFTPD32 + pxelinux.0. The problem occurs only when I use Ctrl-B at the first appearance statement: Press Ctrl-B... and manually run the command autoboot.
In MS VirtualPC 2007 iPXE hangs at:
t… ok
In VMware Workstation 8 iPXE hangs at:
Trying to load: pxelinux.cfg/default
    Not enough memory to load specified image.

iPXE boot normal without any problems from BIOS, other media or pressing Ctrl-B at second appearance statement. Maybe this is problem with INT13, INT18 or INT19 ?
First appearance: Press Ctrl-B to configure iPXE     <-- hangs up
Second appearance: Press Ctrl-B for the iPXE command line...     <-- working OK

Similar problem is with gPXE 1.0.1 inserted to BIOS AWARD 6.00PG. During pressing Ctrl-B at first appearance Press Ctrl-B... and autoboot command then vesamenu.c32 displays very slow :-(. If run gPXE normal or pressing Ctrl-B during second appearance Press Ctrl-B vesamenu.c32 working faster.
Find all posts by this user
Quote this message in a reply
Post Reply 

Messages In This Thread
iPXE hangs on boot from pxelinux at first Ctrl-B - Gelip - 2013-04-14 22:59

User(s) browsing this thread: 1 Guest(s)