make on raspberry

[mcb30]

(2013-04-18 09:08)Viator Wrote:  I tried setting up ipxe on a raspberry PI. The way I use ipxe requires me to build the boot images on the raspberry but I get several errors (all the same, but for different objects) when running make. I do not want to boot the raspberry using ipxe, I just want to generate the files to boot a standard PC.

Code:

[BUILD] bin/__divdi3.o
cc1: error: bad value (i386) for -march switch
cc1: error: unrecognized command line option ‘-mpreferred-stack-boundary=2’
cc1: error: unrecognized command line option ‘-mregparm=3’
cc1: error: unrecognized command line option ‘-mrtd’
cc1: error: unrecognized command line option ‘-m32’
make: *** [bin/__divdi3.o] Error 1

You'll need to install a cross-compiling build of gcc which is capable of building x86 binaries. Once you've done this, you can then build iPXE by adding something like "CROSS_COMPILE=i386-linux-gnu-" to the make command line.

Michael