HP G8 - wimboot fails with amd64 winpe

[Nostradamus]

Hi,

if all files download well and the boot process results in a blank screen the most likely cause is a fail of the PE boot.
You get a blank or blue screen (not BSOD) if the required fonts are missing.
The set of fonts depends on the PE version you use.
E.g. for a PE3.1 you need:
chs_boot.ttf
cht_boot.ttf
jpn_boot.ttf
kor_boot.ttf
wgl4_boot.ttf
not sure if you need all of them, but this set works for me.

I think for PE4 it was this set:
segmono_boot.ttf
segoe_slboot.ttf
segoen_slboot.ttf
wgl4_boot.ttf

segoen_slboot.ttf was missing in the docu.

You also might be interested in my experiences here http://lists.ipxe.org/pipermail/ipxe-dev...02769.html
and here: http://lists.ipxe.org/pipermail/ipxe-dev...02821.html
You could create a ISO using your PE x64 and check if i boots in a VM first. One of the links above also shows a way to boot that ISO using iPXE.
If that works and using wimboot results in a 0xc000000d or 0xc0000017 error we have the same problem