iPXE discussion forum / iPXE user forums / General v / Use MS DHCP for both UEFI and BIOS

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Use MS DHCP for both UEFI and BIOS
2017-02-19, 03:16
Post: #14
BitBub Offline
iPXE User
**
 		Posts: 5
Joined: 2014-Sep
Reputation: 0
RE: [SOLVED] Use MS DHCP for both UEFI and BIOS
(2017-02-18 16:40)sebus Wrote:  Got it in the end.

For UEFI boot, in Policy had to remove option 60 & ADD option 150 -TFTP Server IP Address as per

http://www.cisco.com/c/en/us/support/doc...-dhcp.html

Now my UEFI PXE client boots from what I tell it to boot from!

Option 60 is only used when you are running DHCP and proxyDHCP on the same server. It should almost never be used.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [SOLVED] Use MS DHCP for both UEFI and BIOS - BitBub - 2017-02-19 03:16



User(s) browsing this thread: 1 Guest(s)

Contact Us | iPXE home page | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication