Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[SOLVED] Ctrl-B not working on Acer Aspire One
2016-02-26, 21:21 (This post was last modified: 2016-02-26 21:25 by NiKiZe.)
Post: #4
RE: Ctrl-B not working on Acer Aspire One
(2016-02-26 21:14)mbirth Wrote:  This is an "Insyde H2O EFI 2.0 NB", "Intel UNDI, PXE-2.1 (build 082)" and from there I'm booting the undionly.kpxe.
If you boot undionly.kpxe then it is BIOS Legacy mode not EFI and my best guess then is a broken keyboard Wink

There is no embeded script, and you still see "Press Ctrl-B for the iPXE command line" message?

You can test if Ctrl-B is working from the iPXE shell by using prompt
Code:
prompt --key 0x02 --timeout 5000 Test Ctrl-B && echo OK || echo timeout

(2016-02-26 21:14)mbirth Wrote:  Ctrl-C works in both situations, yes. When editing, Ctrl-A also makes the cursor jump to the beginning of the line, Ctrl-E to the end.

So I guess, it's the typical EFI problem?

If you where running in EFI mode (which you are not) then The fact that Ctrl+ combinations is working would be enough to show that it is not The same firmware problem we have seen before.

Use GitHub Discussions
VRAM bin
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Ctrl-B not working on Acer Aspire One - NiKiZe - 2016-02-26 21:21



User(s) browsing this thread: 2 Guest(s)