ipxe uefi x64 WimBoot [answered]

[Fimlore]

(2016-03-14 18:59)mcb30 Wrote:  

(2016-03-14 16:22)Fimlore Wrote:  The WIM is definitely a x64 version, so that can't be the issue; leaves me only with the BCD and sdi files, are those platform dependent?

Could you extract the file \Windows\Boot\EFI\bootmgfw.efi from your .wim image and post a copy of it somewhere?

Thanks,

Michael

I've extracted and uploaded it to mega:
https://mega.nz/#!9YETFDSD!xR-9WgajnmMbw...U5dc7waq_I

also, I've used the BCD and boot.sdi file from the original Microsoft DVD, but still receive the 0x80000000...03 error

---

(2016-03-11 17:16)NiKiZe Wrote:  Try adding -n BCD to The initrd line so it becomes
Initrd -n BCD http...bc BCD

The -n is used to set the name in efi fs, while the BCD at the end is used in legacy.

However the above is only a problem when the bootloader starts, i guess you have booted something else before since you have bootx64.efi loaded, try an imgfree before to let wimboot load it from wim.

sadly, changing the BCD line also did not help.
To check, i also changes the sdi line but to no avail

--

Then i tried using the bcd file generated by WDS; but still the BOOTx64.EFI error..

----

I got it working using another PE Image.
The non working PE image was created using MDT, this one is a slightly modified Windows ADK image.
Are there known issues with MDT Images?