iPXE discussion forum / iPXE user forums / General v / [Solved][wimboot] Dell Optiplex 7440AIO hangs at startup with UEFI

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[Solved][wimboot] Dell Optiplex 7440AIO hangs at startup with UEFI
2016-07-08, 19:26
Post: #4
pxe_curious Offline
iPXE User
**
 		Posts: 34
Joined: 2014-Aug
Reputation: 2
RE: [Solved][wimboot] Dell Optiplex 7440AIO hangs at startup with UEFI
Just something else I wanted to mention and this thread seems appropriate:

Getting a blank screen when UEFI booting a machine that boots just fine using legacy BIOS firmware? Specifically I am talking Windows 7/Server 2008 R2.

Check your firmware settings to see if there is an option to enable the loading of Legacy Video ROM Options. Sometimes this might be referred to as UEFI BIOS Compatibility Support Module (CSM).

UEFI uses graphics output protocol (GOP) which Windows 7/Server 2008 R2 does not support.

I have run into this with WinPE images as well as Windows Server 2008 R2 installs on Dell 13G server hardware. WinPE 10 and Server 2012 R2 support GOP and work fine.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [Solved][wimboot] Dell Optiplex 7440AIO hangs at startup with UEFI - pxe_curious - 2016-07-08 19:26



User(s) browsing this thread: 1 Guest(s)

Contact Us | iPXE home page | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication