downloading boot.wim fails randomly on intel PRO/100 VE

[djbhagat]

(2016-10-07 08:24)robinsmidsrod Wrote:  Download the latest version of ipxe on http://boot.ipxe.org/ and try to boot that. The intel driver has had quite a lot of work done in the last couple of years, so you might be hitting a driver bug. If you're still getting issues with the latest build then go through the checklist at http://ipxe.org/dev/driver and tell us where it fails (make a table of pass/fail remark for each test).

I am using the latest version of iPXE. I am using the following command -->
make bin/ipxe.lkrn DEBUG=eepro100,tcp:1

I get following few lines and the software hangs at 57%. its not that it always hangs at 57%, it some time hangs at 13% or 61@ or sometimes just reboot the whole system.

following are the few output statement displayed on screen -->

TCP checksum incorrect (is 130c including checksum field, should be 0000)
ifec_net_poll: RU reprimed.
ifec_net_poll: RU reprimed.
57%