iMAC with Broadcom 14e4-1686 BCM57766 : link status down

[marcolefo]

Hi.
Thanks again for your help.

(2017-02-04 00:34)NiKiZe Wrote:  in your video it detects net1
in that image there is only net0 - but twice (no net1)

Again please give the output of dhcp followed by ifstat from official ipxe git sources, without any configuration modifications at all.

Just to limit this down to just the tg3 driver use make bin-x86_64-efi/tg3.efi

so steps I really want you to do so we have a common, minimal, reproducable, understanable testcase:
git clone git.ipxe.org/ipxe.git
cd ipxe/src
make bin-x86_64-efi/tg3.efi
(note that there should not be any configuration changes at all)
cp make bin-x86_64-efi/tg3.efi -> boot device

Ok, I've done that :

Quote:press ctrl-b when booting
type dhcp
type ifstat
take a picture and upload

I can't do that. When asked, I have pressed ctrl-b and I didn't go to the shell but the iMac boot to OS.