ipxe boot thinstation ?

[zulinfi]

when use script
kernel ${base-url}/boot/vmlinuz
initrd ${base-url}/boot/initrd
imgargs vmlinuz splash=silent,theme:default load_ramdisk=1 ramdisk_blocksize=4096 root=/dev/ram0 ramdisk_size=786432 console=tty1 vt.global_cursor_default=0 quiet loglevel=3 LM=3
boot || goto failed

Get error

kernel panic - not syncing :VFS: Unable to mount root fs on unknown-block(1,0)
kernel Offset: disabled
---[ end Kernel panic - not syncing: VFS: Unable to mout root fs on unknown-block(1,0)

what's wrong?

[jbirlingmair]

(2016-06-29 11:02)zulinfi Wrote:  when use script
kernel ${base-url}/boot/vmlinuz
initrd ${base-url}/boot/initrd
imgargs vmlinuz splash=silent,theme:default load_ramdisk=1 ramdisk_blocksize=4096 root=/dev/ram0 ramdisk_size=786432 console=tty1 vt.global_cursor_default=0 quiet loglevel=3 LM=3
boot || goto failed

Get error

kernel panic - not syncing :VFS: Unable to mount root fs on unknown-block(1,0)
kernel Offset: disabled
---[ end Kernel panic - not syncing: VFS: Unable to mout root fs on unknown-block(1,0)

what's wrong?

Hello zulinfi,

I was getting an error similar to yours earlier today.
I am booting Clonezilla Live over Ethernet.

Here is the script I use: https://github.com/jbirlingmair/my-ipxe-...menu2.ipxe

Code:

:clonezilla

kernel tftp://${tftp}/Clonezilla/vmlinuz
initrd tftp://${tftp}/Clonezilla/initrd.img
imgargs vmlinuz boot=live live-config noswap edd=on nomodeset ocs_live_run"ocs-live-general" locales=en_US.UTF-8 vga=788 keyboard-layouts=en nosplash fetch tftp://${tftp}/Clonezilla/filesystem.squashfs
boot || goto failed

The issue I was having was I needed to make sure to take the --keep off of the menu background.

Try this

Code:

kernel ${base-url}/boot/vmlinuz
initrd ${base-url}/boot/initrd
imgargs vmlinuz splash=silent,theme:default load_ramdisk=1 ramdisk_blocksize=4096 root=/dev/ram0 ramdisk_size=786432 console=tty1 vt.global_cursor_default=0 quiet loglevel=3 LM=3
imgstat
read void
boot || goto failed

That will allow you to see what images are loaded and which one is selected. If there is a PNG in there then you had the same problem as me.
The png was confusing the kernel.

That may be your problem if you are using the console command.

[Jan Zeman]

I have this configuration in *.ipxe file:

#!ipxe

dhcp
kernel http://IPADDRESS/ThinStation/vmlinuz initrd=initrd initrd=thinstation.conf.buildtime splash=off console=ttyS3 load_ramdisk=1 ramdisk_blocksize=4096 root=/dev/ram0 ramdisk_size=786432 vt.global_cursor_default=0
initrd --name initrd http://IPADDRESS/ThinStation/initrd
boot

Booting only to text terminal. Not start graphical user inteface.

[NiKiZe]

Are you booting in Legacy or EFI mode? I see you have added initrd=initrd in the last response which is needed in EFI mode. But it is also common to have an old kernel with bugs in regards to initrd when using efi.