iPXE discussion forum / iPXE user forums / General v / intelxl with loopback stuck during loading of ipxe.efidrv

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
intelxl with loopback stuck during loading of ipxe.efidrv
2019-10-01, 16:41
Post: #1
daboemann Offline
iPXE User
**
 		Posts: 1
Joined: 2019-Oct
Reputation: 0
intelxl with loopback stuck during loading of ipxe.efidrv
Hi,

I'm working on a server board that has multiple onboard NICs:
- Intel I210 with 1 physical (1 GbE) port
- Intel I350 1GbE with 4 physical (1 GbE) ports
- Intel X722 with 2 physical (10GbE SFP+) ports

In the UEFI firmware I've integrated iPXE as a UEFI driver. It gets loaded right after its gEfiSimpleTextOutProtocolGuid dependency is loaded. Not sure if it is dependent on other protocols, but at least I know that loading it before have any form of output protocol prevents the driver from initializing.

For test purposes, some of the boards have a cable between the two X722 ports to form a loopback. When loading the iPXE UEFI driver in the BIOS boot process, the driver is stuck in an infinite loop when connecting the X722 port to the iPXE driver. It only continues after removing the loopback. Because I wasn't sure where to look, I decided to enable debug for all of the objects that are being built when building the ipxe.efidrv driver.

The log output is at the bottom. Some notes:
  • I removed the initialization of other devices, as this would otherwise be a log of 4k lines. So only one of the X722 ports is in.
  • What you can see is that at some point it starts to infinitely print the speed and status in the intelxl ("INTELXL 0x861c0790 PHY 0x16 speed 0x08 status 0xe1"). I would expect that it would time-out within a reasonable time to continue with the boot process, but this is not the case. It is really stuck in an infinite loop and preventing the server from continuing.
  • For the I350 I actually also have a network cable running between two ports to create a loopback, and this doesn't cause the intel driver to hang.
  • A bit later in the boot process, when it actually tries to perform a PXE boot for all NICs, the X722 does not infinitely hang but just fails (as expected) to perform a PXE boot.

Any idea's on how to fix this infinite loop during the initialization/connecting of the driver?

Best regards,

Martijn



Here is (some of) the output:
Loading driver at 0x00086018000 EntryPoint=0x0008604CB4C ipxe.efi
InstallProtocolInterface: BC62157E-3E33-4FEC-9920-2D3B36D750DF 754EEA98
EFI handle 0x754ee518 systab 0x87a6e018
EFI does not provide protocol ConsoleControl
EFI protocol ef9fc172-a1b2-4693-b327-6d32fc416042 is at 0x86d397b8
EFI does not provide protocol c12b1873-ac17-4176-ac77-7ecb4defffec
EFI protocol AcpiTable is at 0x77381bd8
EFI protocol 8b843e20-8132-4852-90cc-551a4e4a7f1c is at 0x86dbc4c0
EFI protocol 3152bca5-eade-433d-862e-c01cdc291f44 is at 0x86d1dc80
EFI does not provide configuration table eb9d2d30-2d88-11d3-9a16-0090273fc14d
EFI configuration table eb9d2d31-2d88-11d3-9a16-0090273fc14d is at 0x8738e000
EFI image base address 0x86018000
InstallProtocolInterface: 18A031AB-B443-4D1A-A5C0-0C09261E9F71 861A4E60
InstallProtocolInterface: 6A7A5CFF-E8D9-4F70-BADA-75AB3025CE14 861A4E30
CPUID Intel features: %ecx=77fefbff, %edx=bfebfbff
CPUID AMD features: %ecx=00000121, %edx=2c100800
HV not running in a hypervisor
TIMER could not initialise Hyper-V: No such device (http://ipxe.org/2c834087)
TIMER using efi
Settings 0x861a04a0 ("pci") registered
PROCESS 0x861a7d60 ib_step() starting
PROCESS 0x861a7d80 net_step() starting
PROCESS 0x861a7da0 retry_step() starting
Settings 0x861a1520 ("builtin") registered
Settings 0x861a2000 ("smbios") registered
Settings 0x861a58a0 ("netX") registered
INIT startup efi_tick...
EFI timer started at 32 ticks per second
INIT startup devices...
Adding 3c509 root bus
T509 using ID port at 0110
T509 saw no signs of life
T509 found 0 cards using ID port 0110
Adding EFI root bus
Adding EISA root bus
Adding Hyper-V root bus
CPUID Intel features: %ecx=77fefbff, %edx=bfebfbff
CPUID AMD features: %ecx=00000121, %edx=2c100800
HV not running in a hypervisor
Failed to add Hyper-V root bus: No such device (http://ipxe.org/2c834087)
Adding ISA root bus
Trying ISA driver cs89x0 at I/O 0300
...probe failed

<...removed initialization of other PCI devices ..>

EFIPCI 0000:3b:00.0 (8086:37d0 class 020000) has driver "x722-sfp"
EFIDRV PciRoot(0x2)/Pci(0x0,0x0)/Pci(0x0,0x0)/Pci(0x3,0x0)/Pci(0x0,0x0) has driver "PCI"
++(Driver Image)ipxe.efidrv ...... Connecting
(Controller dpath) PciRoot(0x2)/Pci(0x0,0x0)/Pci(0x0,0x0)/Pci(0x3,0x0)/Pci(0x0,0x0)
(RemainingDevicePath) NULL
EFIDRV PciRoot(0x2)/Pci(0x0,0x0)/Pci(0x0,0x0)/Pci(0x3,0x0)/Pci(0x0,0x0) DRIVER_START
EFIPCI 0000:3b:00.0 (8086:37d0 class 020000) has driver "x722-sfp"
0000:3b:00.0 (8086:37d0) has driver "x722-sfp"
0000:3b:00.0 has mem c4000000 io 0 irq 11
0000:3b:00.0 device not enabled by BIOS! Updating PCI command 0006->0007
0000:3b:00.0 latency timer is unreasonably low at 0. Setting to 32.
INTELXL 0x861c0790 PF 0 using port 0 queues [0x0000-0x02ff]
INTELXL 0x861c0790 has autoloaded MAC address 00:00:00:00:03:14
PCI Capability: 1
PCI Capability: 5
PCI Capability: 17
MSI-X 0x861c07c0 has 129 vectors for 0000:3b:00.0
MSI-X 0x861c07c0 table at 0xc6008000 (BAR3+0x0)
MSI-X 0x861c07c0 PBA at 0xc6009000 (BAR3+0x1000)
INTELXL 0x861c0790 ARQ is at [861c0f00,861c0f80) buf [861c0b00,861c0f00)
INTELXL 0x861c0790 ATQ is at [861c1400,861c1480) buf [861c1000,861c1400)
INTELXL 0x861c0790 firmware v3.10 API v1.6
INTELXL 0x861c0790 VSI 0x0186 uplink 0x0002 downlink 0x0010 conn 0x01
INTELXL 0x861c0790 VSI 0x0186 queue 0x0000 qset 0x0000
NETDEV net5 registered (phys 0000:3b:00.0 hwaddr 00:00:00:00:03:14)
Settings 0x861c06f0 ("net5") registered
InstallProtocolInterface: A19832B9-AC25-11D3-9A2D-0090273FC14D 861C2650
InstallProtocolInterface: 09576E91-6D3F-11D2-8E39-00A0C969723B 861BDFA8
InstallProtocolInterface: E18541CD-F755-4F73-928D-643C8A79B229 861C2A80
InstallProtocolInterface: 1ACED566-76ED-4218-BC81-767F1F977A89 861C2A80
InstallProtocolInterface: 6A7A5CFF-E8D9-4F70-BADA-75AB3025CE14 861C2AA8
InstallProtocolInterface: 56EC3091-954C-11D2-8E3F-00A0C969723B 861C2AC0
IFR 0x6a1da790 string 0x0001 is "iPXE (00:00:00:00:03:14)"
IFR 0x6a1da790 string 0x0002 is "Configure iPXE"

<...removed similar messages..>

IFR 0x6a1da790 end
IFR 0x6a1da790 string 0x005d is "English"
InstallProtocolInterface: 09576E91-6D3F-11D2-8E39-00A0C969723B 861C0A88
InstallProtocolInterface: 330D4706-F2A0-4E4F-A369-B66FA8D54385 861C2AC8
SNPDEV 0x861c2628 installed for net5 as device PciRoot(0x2)/Pci(0x0,0x0)/Pci(0x0,0x0)/Pci(0x3,0x0)/Pci(0x0,0x0)/MAC(000000000314,0x1)
EFIPCI 0000:3b:00.0 using driver "x722-sfp"
EFIDRV PciRoot(0x2)/Pci(0x0,0x0)/Pci(0x0,0x0)/Pci(0x3,0x0)/Pci(0x0,0x0) using driver "PCI"
--(Driver)ipxe.efidrv ......
return status = Success
++(Driver Image)MNP Network Service Driver ...... Connecting
(Controller dpath) PciRoot(0x2)/Pci(0x0,0x0)/Pci(0x0,0x0)/Pci(0x3,0x0)/Pci(0x0,0x0)/MAC(000000000314,0x1)
(RemainingDevicePath) NULL
InstallProtocolInterface: 9E23D768-D2F3-4366-9FC3-3A7ABA864374 74A3D130
InstallProtocolInterface: F36FF770-A7E1-42CF-9ED2-56F0F271F44C 74A27E40
--(Driver)MNP Network Service Driver ......
return status = Success
++(Driver Image)ARP Network Service Driver ...... Connecting
(Controller dpath) PciRoot(0x2)/Pci(0x0,0x0)/Pci(0x0,0x0)/Pci(0x3,0x0)/Pci(0x0,0x0)/MAC(000000000314,0x1)
(RemainingDevicePath) NULL
InstallProtocolInterface: 7AB33A91-ACE5-4326-B572-E7EE33D39F16 74927EC0
SNPDEV 0x861c2628 START
SNPDEV 0x861c2628 INITIALIZE (0 extra RX, 0 extra TX)
NETDEV net5 opening
INTELXL 0x861c0790 ring 248000 is at [861c2c00,861c3000)
INTELXL 0x861c0790 ring 208000 is at [861c3000,861c3400)
No MAC address modify request
SNPDEV 0x861c2628 RECEIVE_FILTERS 00000005&~00000002 reset 0 mcast
INTELXL 0x861c0790 PHY 0x16 speed 0x08 status 0xe1
NETDEV net4 transmission 0x861c15c0 failed: Network unreachable (http://ipxe.org/28086090)
SNPDEV 0x861bff28 TX could not transmit: Network unreachable (http://ipxe.org/28086090)
INTELXL 0x861c0790 PHY 0x16 speed 0x08 status 0xe1
<... infinite speed and status prints...>

INTELXL 0x861c0790 PHY 0x00 speed 0x00 status 0xca <-------- here I removed the adapters from both ports
INTELXL 0x861c0790 PHY 0x00 speed 0x00 status 0xca
INTELXL 0x861c0790 PHY 0x16 speed 0x08 status 0xe1 <---- here I plugged the loopback adapters back in both ports
SNPDEV 0x861c2628 link is down
NETDEV net5 link is down: Down (http://ipxe.org/38086193)
SNPDEV 0x861c2628 link is down
NETDEV net5 link is down: Down (http://ipxe.org/38086193)
SNPDEV 0x861c2628 link is up
NETDEV net5 link is up
SNPDEV 0x861c2628 link is up
NETDEV net5 link is up
SNPDEV 0x861c2628 link is up
NETDEV net5 link is up
SNPDEV 0x861c2628 link is up
NETDEV net5 link is up
SNPDEV 0x861c2628 link is up
NETDEV net5 link is up
SNPDEV 0x861c2628 link is up
NETDEV net5 link is up
SNPDEV 0x861c2628 link is up
NETDEV net5 link is up
SNPDEV 0x861c2628 link is up
NETDEV net5 link is up
SNPDEV 0x861c2628 link is up
NETDEV net5 link is up
SNPDEV 0x861c2628 link is up
NETDEV net5 link is up
SNPDEV 0x861c2628 link is up
NETDEV net5 link is up
SNPDEV 0x861c2628 link is up
NETDEV net5 link is up
SNPDEV 0x861c2628 link is up
NETDEV net5 link is up
SNPDEV 0x861c2628 link is up
NETDEV net5 link is up
SNPDEV 0x861c2628 link is up
NETDEV net5 link is up
SNPDEV 0x861c2628 link is up
NETDEV net5 link is up
SNPDEV 0x861c2628 link is up
NETDEV net5 link is up
SNPDEV 0x861c2628 link is up
NETDEV net5 link is up
SNPDEV 0x861c2628 link is up
NETDEV net5 link is up
SNPDEV 0x861c2628 link is up
NETDEV net5 link is up
SNPDEV 0x861c2628 link is up
NETDEV net5 link is up
SNPDEV 0x861c2628 link is up
NETDEV net5 link is up
SNPDEV 0x861c2628 link is up
NETDEV net5 link is up
SNPDEV 0x861c2628 link is up
NETDEV net5 link is up
SNPDEV 0x861c2628 link is up
NETDEV net5 link is up
SNPDEV 0x861c2628 link is up
NETDEV net5 link is up
SNPDEV 0x861c2628 link is up
NETDEV net5 link is up
SNPDEV 0x861c2628 link is up
NETDEV net5 link is up
SNPDEV 0x861c2628 link is up
NETDEV net5 link is up
SNPDEV 0x861c2628 link is up
NETDEV net5 link is up
SNPDEV 0x861c2628 link is up
NETDEV net5 link is up
SNPDEV 0x861c2628 link is up
NETDEV net5 link is up
SNPDEV 0x861c2628 link is up
NETDEV net5 link is up
InstallProtocolInterface: F44C00EE-1F2C-4A00-AA09-1C9F3E0800A3 74927020
--(Driver)ARP Network Service Driver ......
return status = Success
++(Driver Image)IP4 Network Service Driver ...... Connecting
(Controller dpath) PciRoot(0x2)/Pci(0x0,0x0)/Pci(0x0,0x0)/Pci(0x3,0x0)/Pci(0x0,0x0)/MAC(000000000314,0x1)
(RemainingDevicePath) NULL
InstallProtocolInterface: 7AB33A91-ACE5-4326-B572-E7EE33D39F16 74926EC0
SNPDEV 0x861c2628 RECEIVE_FILTERS 00000005&~00000002 reset 0 mcast
SNPDEV 0x861c2628 RECEIVE_FILTERS 0000000d&~0000000a 0 mcast
InstallProtocolInterface: 09576E91-6D3F-11D2-8E39-00A0C969723B 74925018
InstallProtocolInterface: 330D4706-F2A0-4E4F-A369-B66FA8D54385 74926830
InstallProtocolInterface: C51711E7-B4BF-404A-BFB8-0A048EF1FFE4 74926020
InstallProtocolInterface: 5B446ED1-E30B-4FAA-871A-3654ECA36080 74926578
--(Driver)IP4 Network Service Driver ......
return status = Success
++(Driver Image)UDP Network Service Driver ...... Connecting
(Controller dpath) PciRoot(0x2)/Pci(0x0,0x0)/Pci(0x0,0x0)/Pci(0x3,0x0)/Pci(0x0,0x0)/MAC(000000000314,0x1)
(RemainingDevicePath) NULL
InstallProtocolInterface: 41D94CD2-35B6-455A-8258-D4E51334AADD 748F1020
InstallProtocolInterface: 83F01464-99BD-45E5-B383-AF6305D8E9E6 74A49D20
--(Driver)UDP Network Service Driver ......
return status = Success
++(Driver Image)DHCP Protocol Driver ...... Connecting
(Controller dpath) PciRoot(0x2)/Pci(0x0,0x0)/Pci(0x0,0x0)/Pci(0x3,0x0)/Pci(0x0,0x0)/MAC(000000000314,0x1)
(RemainingDevicePath) NULL
InstallProtocolInterface: 41D94CD2-35B6-455A-8258-D4E51334AADD 748EEE20
InstallProtocolInterface: 3AD9DF29-4501-478D-B1F8-7F7FE70E50F3 748EF3B8
InstallProtocolInterface: 9D9A39D8-BD42-4A73-A4D5-8EE94BE11380 748EE020
--(Driver)DHCP Protocol Driver ......
return status = Success
++(Driver Image)MTFTP4 Network Service ...... Connecting
(Controller dpath) PciRoot(0x2)/Pci(0x0,0x0)/Pci(0x0,0x0)/Pci(0x3,0x0)/Pci(0x0,0x0)/MAC(000000000314,0x1)
(RemainingDevicePath) NULL
InstallProtocolInterface: 41D94CD2-35B6-455A-8258-D4E51334AADD 748E8D20
InstallProtocolInterface: 3AD9DF29-4501-478D-B1F8-7F7FE70E50F3 748E8038
InstallProtocolInterface: 2FE800BE-8F01-4AA6-946B-D71388E1833F 748E97A0
--(Driver)MTFTP4 Network Service ......
return status = Success
++(Driver Image)IP6 Network Service Driver ...... Connecting
(Controller dpath) PciRoot(0x2)/Pci(0x0,0x0)/Pci(0x0,0x0)/Pci(0x3,0x0)/Pci(0x0,0x0)/MAC(000000000314,0x1)
(RemainingDevicePath) NULL
InstallProtocolInterface: 7AB33A91-ACE5-4326-B572-E7EE33D39F16 748E5AC0
SNPDEV 0x861c2628 RECEIVE_FILTERS 0000000d&~0000000a 0 mcast
SNPDEV 0x861c2628 RECEIVE_FILTERS 0000000d&~0000000a 0 mcast
InstallProtocolInterface: 09576E91-6D3F-11D2-8E39-00A0C969723B 748E4B98
InstallProtocolInterface: 330D4706-F2A0-4E4F-A369-B66FA8D54385 748E6FE8
InstallProtocolInterface: EC835DD3-FE0F-617B-A621-B350C3E13388 748E6020
InstallProtocolInterface: 937FE521-95AE-4D1A-8929-48BCD90AD31A 748E6F70
--(Driver)IP6 Network Service Driver ......
return status = Success
++(Driver Image)UDP6 Network Service Driver ...... Connecting
(Controller dpath) PciRoot(0x2)/Pci(0x0,0x0)/Pci(0x0,0x0)/Pci(0x3,0x0)/Pci(0x0,0x0)/MAC(000000000314,0x1)
(RemainingDevicePath) NULL
InstallProtocolInterface: 2C8759D5-5C2D-66EF-925F-B66C101957E2 748AE020
InstallProtocolInterface: 66ED4721-3C98-4D3E-81E3-D03DD39A7254 748E2620
--(Driver)UDP6 Network Service Driver ......
return status = Success
++(Driver Image)DHCP6 Protocol Driver ...... Connecting
(Controller dpath) PciRoot(0x2)/Pci(0x0,0x0)/Pci(0x0,0x0)/Pci(0x3,0x0)/Pci(0x0,0x0)/MAC(000000000314,0x1)
(RemainingDevicePath) NULL
InstallProtocolInterface: 2C8759D5-5C2D-66EF-925F-B66C101957E2 748AB020
InstallProtocolInterface: 4F948815-B4B9-43CB-8A33-90E060B34955 748AC1B8
InstallProtocolInterface: 9FB9A8A1-2F4A-43A6-889C-D0F7B6C47AD5 748AC0B0
--(Driver)DHCP6 Protocol Driver ......
return status = Success
++(Driver Image)MTFTP6 Network Service Driver ...... Connecting
(Controller dpath) PciRoot(0x2)/Pci(0x0,0x0)/Pci(0x0,0x0)/Pci(0x3,0x0)/Pci(0x0,0x0)/MAC(000000000314,0x1)
(RemainingDevicePath) NULL
--(Driver)MTFTP6 Network Service Driver ......
return status = Unsupported (Driver Name) MTFTP6 Network Service Driver (Controller dpath) PciRoot(0x2)/Pci(0x0,0x0)/Pci(0x0,0x0)/Pci(0x3,0x0)/Pci(0x0,0x0)/MAC(000000000314,0x1)
++(Driver Image)UEFI PXE Base Code Driver ...... Connecting
(Controller dpath) PciRoot(0x2)/Pci(0x0,0x0)/Pci(0x0,0x0)/Pci(0x3,0x0)/Pci(0x0,0x0)/MAC(000000000314,0x1)
(RemainingDevicePath) NULL
InstallProtocolInterface: B95E9FDA-26DE-48D2-8807-1F9107AC5E3A 7489E030
InstallProtocolInterface: 8A219718-4EF5-4761-91C8-C0F04BDA9E56 748A91A0
InstallProtocolInterface: 41D94CD2-35B6-455A-8258-D4E51334AADD 7489D420
InstallProtocolInterface: 3AD9DF29-4501-478D-B1F8-7F7FE70E50F3 7489DEB8
InstallProtocolInterface: 78247C57-63DB-4708-99C2-A8B4A9A61F6B 748A94B0
InstallProtocolInterface: 41D94CD2-35B6-455A-8258-D4E51334AADD 7489CC20
InstallProtocolInterface: 3AD9DF29-4501-478D-B1F8-7F7FE70E50F3 7489C038
InstallProtocolInterface: 41D94CD2-35B6-455A-8258-D4E51334AADD 7489C420
InstallProtocolInterface: 3AD9DF29-4501-478D-B1F8-7F7FE70E50F3 7489C2B8
InstallProtocolInterface: F4B427BB-BA21-4F16-BC4E-43E416AB619C 7489BBB0
InstallProtocolInterface: 41D94CD2-35B6-455A-8258-D4E51334AADD 7489B7A0
InstallProtocolInterface: 09576E91-6D3F-11D2-8E39-00A0C969723B 7489B618
InstallProtocolInterface: 56EC3091-954C-11D2-8E3F-00A0C969723B 7489B128
InstallProtocolInterface: 03C4E603-AC28-11D3-9A2D-0090273FC14D 7489E120
InstallProtocolInterface: A19832B9-AC25-11D3-9A2D-0090273FC14D 861C2650
--(Driver)UEFI PXE Base Code Driver ......
return status = Success
++(Driver Image)TCP Network Service Driver ...... Connecting
(Controller dpath) PciRoot(0x2)/Pci(0x0,0x0)/Pci(0x0,0x0)/Pci(0x3,0x0)/Pci(0x0,0x0)/MAC(000000000314,0x1)
(RemainingDevicePath) NULL
InstallProtocolInterface: 41D94CD2-35B6-455A-8258-D4E51334AADD 7489ADA0
InstallProtocolInterface: 00720665-67EB-4A99-BAF7-D3C33A1C7CC9 7489AF40
--(Driver)TCP Network Service Driver ......
return status = Success
++(Driver Image)TCP Network Service Driver ...... Connecting
(Controller dpath) PciRoot(0x2)/Pci(0x0,0x0)/Pci(0x0,0x0)/Pci(0x3,0x0)/Pci(0x0,0x0)/MAC(000000000314,0x1)
(RemainingDevicePath) NULL
InstallProtocolInterface: 2C8759D5-5C2D-66EF-925F-B66C101957E2 74897CA0
InstallProtocolInterface: EC20EB79-6C1A-4664-9A0D-D2E4CC16D664 74898240
--(Driver)TCP Network Service Driver ......
return status = Success
++(Driver Image)iSCSI Driver ...... Connecting
(Controller dpath) PciRoot(0x2)/Pci(0x0,0x0)/Pci(0x0,0x0)/Pci(0x3,0x0)/Pci(0x0,0x0)/MAC(000000000314,0x1)
(RemainingDevicePath) NULL
InstallProtocolInterface: 65530BC7-A359-410F-B010-5AADC7EC2B62 748953B8
InstallProtocolInterface: 41D94CD2-35B6-455A-8258-D4E51334AADD 74894C20
InstallProtocolInterface: FA3CDE4C-87C2-427D-AEDE-7DD096C88C58 74895930
--(Driver)iSCSI Driver ......
return status = Not Found (Driver Name) iSCSI Driver (Controller dpath) PciRoot(0x2)/Pci(0x0,0x0)/Pci(0x0,0x0)/Pci(0x3,0x0)/Pci(0x0,0x0)/MAC(000000000314,0x1)
++(Driver Image)iSCSI Driver ...... Connecting
(Controller dpath) PciRoot(0x2)/Pci(0x0,0x0)/Pci(0x0,0x0)/Pci(0x3,0x0)/Pci(0x0,0x0)/MAC(000000000314,0x1)
(RemainingDevicePath) NULL
InstallProtocolInterface: 46E44855-BD60-4AB7-AB0D-A679B9447D77 74894638
InstallProtocolInterface: 2C8759D5-5C2D-66EF-925F-B66C101957E2 74893D20
InstallProtocolInterface: 28BE27E5-66CC-4A31-A315-DB14C3744D85 748942B0
--(Driver)iSCSI Driver ......
return status = Not Found (Driver Name) iSCSI Driver (Controller dpath) PciRoot(0x2)/Pci(0x0,0x0)/Pci(0x0,0x0)/Pci(0x3,0x0)/Pci(0x0,0x0)/MAC(000000000314,0x1)
SNP PciRoot(0x2)/Pci(0x0,0x0)/Pci(0x0,0x0)/Pci(0x3,0x0)/Pci(0x0,0x0)/MAC(000000000314,0x1)/IPv4(0.0.0.0) is an SNP device
EFIDRV PciRoot(0x2)/Pci(0x0,0x0)/Pci(0x0,0x0)/Pci(0x3,0x0)/Pci(0x0,0x0)/MAC(000000000314,0x1)/IPv4(0.0.0.0) has driver "SNP"
++(Driver Image)ipxe.efidrv ...... Connecting
(Controller dpath) PciRoot(0x2)/Pci(0x0,0x0)/Pci(0x0,0x0)/Pci(0x3,0x0)/Pci(0x0,0x0)/MAC(000000000314,0x1)/IPv4(0.0.0.0)
(RemainingDevicePath) NULL
EFIDRV PciRoot(0x2)/Pci(0x0,0x0)/Pci(0x0,0x0)/Pci(0x3,0x0)/Pci(0x0,0x0)/MAC(000000000314,0x1)/IPv4(0.0.0.0) DRIVER_START
EFIDRV PciRoot(0x2)/Pci(0x0,0x0)/Pci(0x0,0x0)/Pci(0x3,0x0)/Pci(0x0,0x0)/MAC(000000000314,0x1)/IPv4(0.0.0.0) is not supported by driver "PCI": Error 0x7f10e183 (http://ipxe.org/7f10e183)
EFIDRV PciRoot(0x2)/Pci(0x0,0x0)/Pci(0x0,0x0)/Pci(0x3,0x0)/Pci(0x0,0x0)/MAC(000000000314,0x1)/IPv4(0.0.0.0) is not supported by driver "NII": Error 0x7f684083 (http://ipxe.org/7f684083)
SNP PciRoot(0x2)/Pci(0x0,0x0)/Pci(0x0,0x0)/Pci(0x3,0x0)/Pci(0x0,0x0)/MAC(000000000314,0x1)/IPv4(0.0.0.0) is an SNP device
>>(Driver Image)UEFI PXE Base Code Driver ...... Disconnecting
(Controller dpath) PciRoot(0x2)/Pci(0x0,0x0)/Pci(0x0,0x0)/Pci(0x3,0x0)/Pci(0x0,0x0)/MAC(000000000314,0x1)/IPv4(0.0.0.0)
<<(Driver)UEFI PXE Base Code Driver ...... return status = Success
EFIDEV UNKNOWN<0x7489b598> cannot open device path: Error 0x7f45e082 (http://ipxe.org/7f45e082)
EFIDEV UNKNOWN<0x7489b598> is not a PCI device: Error 0x7f45e082 (http://ipxe.org/7f45e082)
EFIDEV UNKNOWN<0x7489b598> could not get underlying device information
SNPDEV 0x861c2628 SHUTDOWN
NETDEV net5 closing
INTF 0x861c0758+18->0x8619d540+0 close (Operation canceled (http://ipxe.org/0b086095))
NETDEV rejecting duplicate (phys SNP-0x7489b598) of net5 (phys 0000:3b:00.0)
REFCNT 0x861c3408 being freed via method 0x86090ac7
EFIDRV UNKNOWN<0x7489b598> could not start driver "SNP": Error 0x14086088 (http://ipxe.org/14086088)
--(Driver)ipxe.efidrv ......
return status = Unsupported (Driver Name) ipxe.efidrv (Controller dpath) PciRoot(0x2)/Pci(0x0,0x0)/Pci(0x0,0x0)/Pci(0x3,0x0)/Pci(0x0,0x0)/MAC(000000000314,0x1)/IPv4(0.0.0.0)




Find all posts by this user
Quote this message in a reply
2019-10-02, 01:21
Post: #2
NiKiZe Offline
iPXE nerd, and nerdy helper
*******
 		Posts: 975
Joined: 2015-Feb
Reputation: 23
RE: intelxl with loopback stuck during loading of ipxe.efidrv
by building the pcii-d.x you would have a ipxe with only that driver supported see https://ipxe.org/appnote/buildtargets
Do you see the same issue with loopback when building and starting as a normal .efi?
Loopback should be part of normal dev testing: https://ipxe.org/dev/driver so seems odd that you have that issue.

On that note, I would recommend sending this to the mailing list - you might want to have a little less details in the mail, and refer to this thread.
Use GitHub Discussions
VRAM bin
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 




User(s) browsing this thread: 2 Guest(s)

Contact Us | iPXE home page | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication