iPXE discussion forum / iPXE user forums / General v / Install into iscsi problem

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Install into iscsi problem
2011-06-04, 12:36 (This post was last modified: 2011-06-04 12:43 by eclere.)
Post: #1
eclere Offline
iPXE User
**
 		Posts: 5
Joined: 2011-Jun
Reputation: 0
Install into iscsi problem
Hello,
I have all the settings described in this manual performed.

The problem is that the windows setup give me the following error:
WdsClient:Failed to get an ip address. Be shure DHCP is working...

I'm sure the DHCP service is running properly.

When i run the setup without iPXE, and insert a drive, the windows Setup install.

iPXE self get the right reserved IP.

Can anybody help?

Thorsten
Find all posts by this user
Quote this message in a reply
2011-06-04, 19:56
Post: #2
mcb30 Offline
Lead Developer
*******
 		Posts: 543
Joined: 2011-Apr
Reputation: 30
RE: Install into iscsi problem
(2011-06-04 12:36)eclere Wrote:  The problem is that the windows setup give me the following error:
WdsClient:Failed to get an ip address. Be shure DHCP is working...

Did you try the ideas suggested in the "Troubleshooting" section at the bottom of the document?

Do you have multiple network interfaces on this machine? I have known WDS complain with that error message if it can't get an address via DHCP for all network interfaces (even if the other interfaces are not needed for the installation to proceed).

Michael
Visit this user's website Find all posts by this user
Quote this message in a reply
2011-06-04, 23:28
Post: #3
eclere Offline
iPXE User
**
 		Posts: 5
Joined: 2011-Jun
Reputation: 0
RE: Install into iscsi problem
(2011-06-04 19:56)mcb30 Wrote:  Did you try the ideas suggested in the "Troubleshooting" section at the bottom of the document?

Shure, but i cannot view the log files. The Win7 setup restart automaticly new after closing the error dialog.

The "machine" is a VM in Hyper-V. With the normal network card the iscsi target is found and i get the DHCP error. When i remove it, an add a old network card, the Win7 setup starts, but the iscsi is target doesnt find.

Thorsten
Find all posts by this user
Quote this message in a reply
2011-06-06, 01:12
Post: #4
mcb30 Offline
Lead Developer
*******
 		Posts: 543
Joined: 2011-Apr
Reputation: 30
RE: Install into iscsi problem
(2011-06-04 23:28)eclere Wrote:  
(2011-06-04 19:56)mcb30 Wrote:  Did you try the ideas suggested in the "Troubleshooting" section at the bottom of the document?
Shure, but i cannot view the log files. The Win7 setup restart automaticly new after closing the error dialog.

You should be able to press Shift-F10 to access the command prompt (and the log files) before you close the error dialog.

Michael
Visit this user's website Find all posts by this user
Quote this message in a reply
2011-06-13, 17:04 (This post was last modified: 2011-06-13 17:06 by eclere.)
Post: #5
eclere Offline
iPXE User
**
 		Posts: 5
Joined: 2011-Jun
Reputation: 0
RE: Install into iscsi problem
Hello,

sorry for my late answer. I was very busy.

Now i have the log file. Here are the last four lines with the error:
Code:
2011-06-13 17:31:12, Info                  WDS    Spent 60903ms confirming network initialization; status 0x003d0002
2011-06-13 17:31:12, Info                  WDS    GetNetworkingInfo: WpeNetworkStatus returned [0x6]. Flags set: WPE_NETWORK_ADAPTER_OPERATIONAL WPE_NETWORK_DHCP_ENABLED  
2011-06-13 17:31:12, Error      [0x0b003f] WDS    StartNetworking: Failed to start networking. Error code [0x800704C6].[gle=0x000000cb]
2011-06-13 17:31:12, Info       [0x0640ae] IBSLIB PublishMessage: Publishing message [WdsClient: Fehler beim Abrufen einer IP-Adresse vom DHCP-Server. Stellen Sie sicher, dass in diesem Netzwerksegment ein funktionierender DHCP-Server in Betrieb ist.]

First i tought it would be at the virtual machine, so I moved to real hardware. But here ist the same problem too.

I have checked the correkt ip, and pinged the iSCSI target.
I was able to save the logfile in the iSCSI Target!!!.

Conclusion: Network and ISCSI is ok. Windows notHuh

Any ideas?

Thorsten
Find all posts by this user
Quote this message in a reply
2011-06-13, 18:11 (This post was last modified: 2011-06-13 21:26 by eclere.)
Post: #6
eclere Offline
iPXE User
**
 		Posts: 5
Joined: 2011-Jun
Reputation: 0
RE: Install into iscsi problem
Ok, i setup a complete new environment with 1 dc + DNS + DHCP on Win2008 RU2 SP1. As clientsoftware i uses win7 and Win 2008 RU2.

I got the same error.
The hardware was different again, so I think the problem is reproducible.
Find all posts by this user
Quote this message in a reply
2011-06-14, 15:07
Post: #7
viveksubbarao Offline
iPXE User
**
 		Posts: 2
Joined: 2011-Jun
Reputation: 0
RE: Install into iscsi problem
Which network adapter are you using. Check if you have the latest driver and also try loading the driver from a USB device during Windows installation.
Find all posts by this user
Quote this message in a reply
2011-06-15, 22:31 (This post was last modified: 2011-06-15 22:34 by eclere.)
Post: #8
eclere Offline
iPXE User
**
 		Posts: 5
Joined: 2011-Jun
Reputation: 0
RE: Install into iscsi problem
(2011-06-14 15:07)viveksubbarao Wrote:  Which network adapter are you using. Check if you have the latest driver and also try loading the driver from a USB device during Windows installation.

The Setup is broken before i get the change to load any driver.

I have tested different Networkcards. DLink, TPLink, Realtec, Intel and the both cards in Hyper-V.

As I said, Network ist OK. IP is the right which i have reserved in the DHCP Server. I have saved the setupact.log in the iSCSI Target.

When i run the Setup without iPXI the Windows Setup runs complete, but only with a local harddrive.

Here the complete setupact.log
Code:
2011-06-13 17:30:01, Info                  IBS    InstallWindows:Successfully loaded resource language [de-DE]
2011-06-13 17:30:01, Info       [0x0601c1] IBS    InstallWindows:Install Path = X:\Sources
2011-06-13 17:30:01, Info       [0x0601c2] IBS    InstallWindows:Setup Phase = 2
2011-06-13 17:30:01, Info       [0x0601e9] IBS    CheckWinPEVersion:Compatible WinPE Version 6.1.7600 sp 0.0
2011-06-13 17:30:01, Info       [0x0601c9] IBS    InstallWindows:Starting a new install from WinPE
2011-06-13 17:30:01, Info                  IBS    InstallWindows: Setup working directory = X:\WINDOWS\panther
2011-06-13 17:30:01, Info       [0x0601ce] IBS    Setup has started phase 2 at 2011-06-13 17:30:01
2011-06-13 17:30:01, Info       [0x0601cf] IBS    Install source is X:\Sources
2011-06-13 17:30:01, Info       [0x0601d0] IBS    Build version is 6.1.7600.16385 (win7_rtm.090713-1255)
2011-06-13 17:30:01, Info       [0x06403f] IBSLIB CreateSetupBlackboard:Creating a new persistent blackboard. Path is [X:\WINDOWS\panther\SetupInfo] Setup phase is [2]
2011-06-13 17:30:01, Info       [0x090008] PANTHR CBlackboard::Open: X:\WINDOWS\panther\SetupInfo succeeded.
2011-06-13 17:30:01, Info       [0x064043] IBSLIB CreateSetupBlackboard:Successfully created/opened Setup black board path is [X:\WINDOWS\panther\SetupInfo]
2011-06-13 17:30:01, Info                  IBS    InstallWindows:No UI language from a previous boot was found on the blackboard. Using selected language [de-DE].
2011-06-13 17:30:01, Info                  IBS    InstallWindows:Setup architecture is [x86]
2011-06-13 17:30:01, Info       [0x0601d5] IBS    InstallWindows:Starting with Empty Queue. Setup Phase = 2
2011-06-13 17:30:01, Info                  PANTHR InitializedCriticalSection for pExecQueue->csLock;
2011-06-13 17:30:01, Info                  PANTHR InitializeModule: Initializing ExecQueue->csLock;
2011-06-13 17:30:01, Info                  PANTHR InitializeModule: Initializing ExecQueue->csLock;
2011-06-13 17:30:01, Info       [0x0601a4] IBS    LoadWorkerModules:Successfully added worker module ScenarioDetect in winsetup.dll
2011-06-13 17:30:01, Info                  PANTHR InitializeModule: Initializing ExecQueue->csLock;
2011-06-13 17:30:01, Info       [0x0601a4] IBS    LoadWorkerModules:Successfully added worker module Engine in winsetup.dll
2011-06-13 17:30:01, Info                  PANTHR InitializeModule: Initializing ExecQueue->csLock;
2011-06-13 17:30:01, Info       [0x0601a4] IBS    LoadWorkerModules:Successfully added worker module Internal in winsetup.dll
2011-06-13 17:30:01, Info                  PANTHR InitializeModule: Initializing ExecQueue->csLock;
2011-06-13 17:30:01, Info       [0x0601a4] IBS    LoadWorkerModules:Successfully added worker module ErrorHandler in winsetup.dll
2011-06-13 17:30:01, Info                  PANTHR InitializeModule: Initializing ExecQueue->csLock;
2011-06-13 17:30:01, Info       [0x0601a4] IBS    LoadWorkerModules:Successfully added worker module Diagnostic in diagnostic.dll
2011-06-13 17:30:01, Info                  PANTHR InitializeModule: Initializing ExecQueue->csLock;
2011-06-13 17:30:01, Info       [0x0601a4] IBS    LoadWorkerModules:Successfully added worker module Unattend in winsetup.dll
2011-06-13 17:30:01, Info                  PANTHR InitializeModule: Initializing ExecQueue->csLock;
2011-06-13 17:30:01, Info       [0x0601a4] IBS    LoadWorkerModules:Successfully added worker module ParseCommandLine in winsetup.dll
2011-06-13 17:30:01, Info                  PANTHR InitializeModule: Initializing ExecQueue->csLock;
2011-06-13 17:30:01, Info       [0x0601a4] IBS    LoadWorkerModules:Successfully added worker module Ems  in winsetup.dll
2011-06-13 17:30:01, Info                  PANTHR InitializeModule: Initializing ExecQueue->csLock;
2011-06-13 17:30:01, Info       [0x0601a4] IBS    LoadWorkerModules:Successfully added worker module PrepareInstallDrive in winsetup.dll
2011-06-13 17:30:01, Info                  PANTHR InitializeModule: Initializing ExecQueue->csLock;
2011-06-13 17:30:01, Info       [0x0601a4] IBS    LoadWorkerModules:Successfully added worker module TempDrive in winsetup.dll
2011-06-13 17:30:01, Info                  PANTHR InitializeModule: Initializing ExecQueue->csLock;
2011-06-13 17:30:01, Info       [0x0601a4] IBS    LoadWorkerModules:Successfully added worker module CopySetupFiles in winsetup.dll
2011-06-13 17:30:01, Info                  PANTHR InitializeModule: Initializing ExecQueue->csLock;
2011-06-13 17:30:01, Info       [0x0601a4] IBS    LoadWorkerModules:Successfully added worker module BootPrep in winsetup.dll
2011-06-13 17:30:01, Info                  PANTHR InitializeModule: Initializing ExecQueue->csLock;
2011-06-13 17:30:01, Info       [0x0601a4] IBS    LoadWorkerModules:Successfully added worker module BootEntries in winsetup.dll
2011-06-13 17:30:01, Info                  PANTHR InitializeModule: Initializing ExecQueue->csLock;
2011-06-13 17:30:01, Info       [0x0601a4] IBS    LoadWorkerModules:Successfully added worker module CopyPrivates in winsetup.dll
2011-06-13 17:30:01, Info                  PANTHR InitializeModule: Initializing ExecQueue->csLock;
2011-06-13 17:30:01, Info       [0x0601a4] IBS    LoadWorkerModules:Successfully added worker module ProductKey in winsetup.dll
2011-06-13 17:30:01, Info                  PANTHR InitializeModule: Initializing ExecQueue->csLock;
2011-06-13 17:30:01, Info       [0x0601a4] IBS    LoadWorkerModules:Successfully added worker module ComputerName in winsetup.dll
2011-06-13 17:30:01, Info                  PANTHR InitializeModule: Initializing ExecQueue->csLock;
2011-06-13 17:30:01, Info       [0x0601a4] IBS    LoadWorkerModules:Successfully added worker module License in winsetup.dll
2011-06-13 17:30:01, Info                  PANTHR InitializeModule: Initializing ExecQueue->csLock;
2011-06-13 17:30:01, Info       [0x0601a4] IBS    LoadWorkerModules:Successfully added worker module DiskInformation in winsetup.dll
2011-06-13 17:30:01, Info                  PANTHR InitializeModule: Initializing ExecQueue->csLock;
2011-06-13 17:30:01, Info       [0x0601a4] IBS    LoadWorkerModules:Successfully added worker module FixBBPaths in winsetup.dll
2011-06-13 17:30:01, Info                  PANTHR InitializeModule: Initializing ExecQueue->csLock;
2011-06-13 17:30:01, Info       [0x0601a4] IBS    LoadWorkerModules:Successfully added worker module DiskConfig in winsetup.dll
2011-06-13 17:30:01, Info                  PANTHR InitializeModule: Initializing ExecQueue->csLock;
2011-06-13 17:30:01, Info       [0x0601a4] IBS    LoadWorkerModules:Successfully added worker module CreatePageFile in winsetup.dll
2011-06-13 17:30:01, Info                  PANTHR InitializeModule: Initializing ExecQueue->csLock;
2011-06-13 17:30:01, Info       [0x0601a4] IBS    LoadWorkerModules:Successfully added worker module Imaging in winsetup.dll
2011-06-13 17:30:01, Info                  PANTHR InitializeModule: Initializing ExecQueue->csLock;
2011-06-13 17:30:01, Info       [0x0601a4] IBS    LoadWorkerModules:Successfully added worker module CopyImages in winsetup.dll
2011-06-13 17:30:01, Info                  PANTHR InitializeModule: Initializing ExecQueue->csLock;
2011-06-13 17:30:01, Info       [0x0601a4] IBS    LoadWorkerModules:Successfully added worker module DeployImages in winsetup.dll
2011-06-13 17:30:01, Info                  PANTHR InitializeModule: Initializing ExecQueue->csLock;
2011-06-13 17:30:01, Info       [0x0601a4] IBS    LoadWorkerModules:Successfully added worker module DiskSpace in winsetup.dll
2011-06-13 17:30:01, Info                  PANTHR InitializeModule: Initializing ExecQueue->csLock;
2011-06-13 17:30:01, Info       [0x0601a4] IBS    LoadWorkerModules:Successfully added worker module Completion in winsetup.dll
2011-06-13 17:30:01, Info                  PANTHR InitializeModule: Initializing ExecQueue->csLock;
2011-06-13 17:30:01, Info       [0x0601a4] IBS    LoadWorkerModules:Successfully added worker module MountDev in winsetup.dll
2011-06-13 17:30:01, Info                  PANTHR InitializeModule: Initializing ExecQueue->csLock;
2011-06-13 17:30:01, Info       [0x0601a4] IBS    LoadWorkerModules:Successfully added worker module Cmi in cmisetup.dll
2011-06-13 17:30:01, Info                  PANTHR InitializeModule: Initializing ExecQueue->csLock;
2011-06-13 17:30:01, Info       [0x0601a4] IBS    LoadWorkerModules:Successfully added worker module SystemRestore in winsetup.dll
2011-06-13 17:30:01, Info                  PANTHR InitializeModule: Initializing ExecQueue->csLock;
2011-06-13 17:30:01, Info       [0x0601a4] IBS    LoadWorkerModules:Successfully added worker module FirstBootCleanup in winsetup.dll
2011-06-13 17:30:01, Info                  PANTHR InitializeModule: Initializing ExecQueue->csLock;
2011-06-13 17:30:01, Info       [0x0601a4] IBS    LoadWorkerModules:Successfully added worker module RestartModule in winsetup.dll
2011-06-13 17:30:01, Info                  PANTHR InitializeModule: Initializing ExecQueue->csLock;
2011-06-13 17:30:01, Info       [0x0601a4] IBS    LoadWorkerModules:Successfully added worker module ExternalDrivers in winsetup.dll
2011-06-13 17:30:01, Info                  PANTHR InitializeModule: Initializing ExecQueue->csLock;
2011-06-13 17:30:01, Info       [0x0601a4] IBS    LoadWorkerModules:Successfully added worker module CBS in winsetup.dll
2011-06-13 17:30:01, Info                  PANTHR InitializeModule: Initializing ExecQueue->csLock;
2011-06-13 17:30:01, Info       [0x0601a4] IBS    LoadWorkerModules:Successfully added worker module SkuAssembly in cmisetup.dll
2011-06-13 17:30:01, Info                  PANTHR InitializeModule: Initializing ExecQueue->csLock;
2011-06-13 17:30:01, Info       [0x0601a4] IBS    LoadWorkerModules:Successfully added worker module LanguagePack in winsetup.dll
2011-06-13 17:30:01, Info                  PANTHR InitializeModule: Initializing ExecQueue->csLock;
2011-06-13 17:30:01, Info       [0x0601a4] IBS    LoadWorkerModules:Successfully added worker module ConfigSet in winsetup.dll
2011-06-13 17:30:01, Info                  PANTHR InitializeModule: Initializing ExecQueue->csLock;
2011-06-13 17:30:01, Info       [0x0601a4] IBS    LoadWorkerModules:Successfully added worker module UnattendImgInstall in winsetup.dll
2011-06-13 17:30:01, Info                  PANTHR InitializeModule: Initializing ExecQueue->csLock;
2011-06-13 17:30:01, Info       [0x0601a4] IBS    LoadWorkerModules:Successfully added worker module CFGOfflineImage in winsetup.dll
2011-06-13 17:30:01, Info                  PANTHR InitializeModule: Initializing ExecQueue->csLock;
2011-06-13 17:30:01, Info                         PnPIBS: Initializing the PnP IBS Module ...

2011-06-13 17:30:01, Info                         PnPIBS: Successfully initialized the PnP IBS Module.

2011-06-13 17:30:01, Info       [0x0601a4] IBS    LoadWorkerModules:Successfully added worker module PnP IBS module in pnpibs.dll
2011-06-13 17:30:01, Info                  PANTHR InitializeModule: Initializing ExecQueue->csLock;
2011-06-13 17:30:01, Info       [0x0601a4] IBS    LoadWorkerModules:Successfully added worker module Compliance in winsetup.dll
2011-06-13 17:30:01, Info                  PANTHR InitializeModule: Initializing ExecQueue->csLock;
2011-06-13 17:30:01, Info       [0x0601a4] IBS    LoadWorkerModules:Successfully added worker module Rollback in winsetup.dll
2011-06-13 17:30:01, Info                  PANTHR InitializeModule: Initializing ExecQueue->csLock;
2011-06-13 17:30:01, Info       [0x0601a4] IBS    LoadWorkerModules:Successfully added worker module Locale in winsetup.dll
2011-06-13 17:30:01, Info                  PANTHR InitializeModule: Initializing ExecQueue->csLock;
2011-06-13 17:30:01, Info       [0x0601a4] IBS    LoadWorkerModules:Successfully added worker module Source media module in winsetup.dll
2011-06-13 17:30:01, Info       [0x060359] IBS    Callback_ScenarioDetect:Setup is starting from [2] phase
2011-06-13 17:30:01, Info                  IBS    Callback_BootEnvironmentDetect:FirmwareType 1.
2011-06-13 17:30:01, Info                  IBS    Callback_BootEnvironmentDetect: Detected boot environment: BIOS
2011-06-13 17:30:01, Info                  PANTHR InitializeModule: Initializing ExecQueue->csLock;
2011-06-13 17:30:01, Info       [0x0601a4] IBS    LoadWorkerModules:Successfully added worker module WinPEUI in win32ui.dll
2011-06-13 17:30:01, Info                  PANTHR InitializeModule: Initializing ExecQueue->csLock;
2011-06-13 17:30:01, Info       [0x0601a4] IBS    LoadWorkerModules:Successfully added worker module WinPEProgress in spprgrss.dll
2011-06-13 17:30:01, Info                  PANTHR InitializeModule: Initializing ExecQueue->csLock;
2011-06-13 17:30:01, Info       [0x0601a4] IBS    LoadWorkerModules:Successfully added worker module WinPEUpgLoader in upgloader.dll
2011-06-13 17:30:01, Info                  PANTHR InitializeModule: Initializing ExecQueue->csLock;
2011-06-13 17:30:01, Info       [0x0601a4] IBS    LoadWorkerModules:Successfully added worker module WdsClient in wdsclient.dll
2011-06-13 17:30:01, Info                  PANTHR InitializeModule: Initializing ExecQueue->csLock;
2011-06-13 17:30:01, Info       [0x0601a4] IBS    LoadWorkerModules:Successfully added worker module WpeUntndBtstrp in winsetup.dll
2011-06-13 17:30:01, Info                  PANTHR InitializeModule: Initializing ExecQueue->csLock;
2011-06-13 17:30:01, Info       [0x0601a4] IBS    LoadWorkerModules:Successfully added worker module Cryptography in cryptosetup.dll
2011-06-13 17:30:01, Info       [0x060004] IBS    Callback_UpdateDrivePathsOnBB:No need to update the blackboard paths.
2011-06-13 17:30:01, Info                  IBS    Callback_Engine_StartupScenarioIsWinPE:Setup is running from RAM drive. Path is [:]
2011-06-13 17:30:01, Info                  IBS    LoadHWCompatData:Successfully opened HW compat file [X:\Sources\hwcompat.txt]
2011-06-13 17:30:02, Info                  IBS    LoadHWCompatData:Successfully opened HW compat file [X:\Sources\hwexclude.txt]
2011-06-13 17:30:02, Info                  IBS    Callback_Compliance_LoadDeviceCompatDB:Count of Device IDs is [18663], count of exclusions is [44]
2011-06-13 17:30:02, Info                  IBS    EnumOnlineDriverStoreForInjectedDriverPackages:Enumerating online driver store for injected driver packages.
2011-06-13 17:30:02, Info                  IBS    EnumOnlineDriverStoreForInjectedDriverPackages:Enumerated online driver store. Return code is [0x0]
2011-06-13 17:30:02, Info       [0x070035] DIAG   CallBack_DiagnosticDataGeneration: Called with notification for Initialization
2011-06-13 17:30:02, Info       [0x07003b] DIAG   CallBack_DiagnosticDataGeneration: Starting Timer as we are starting new phase
2011-06-13 17:30:02, Info       [0x0b0022] WDS    StartNetworking: Trying to start networking.
2011-06-13 17:30:02, Info                  WDS    Network service dhcp not running or could not be queried: 3f7930 1 1
2011-06-13 17:30:02, Info                  WDS    Network service lmhosts not running or could not be queried: 3f7a48 1 1
2011-06-13 17:30:02, Info                  WDS    Network service lanmanworkstation not running or could not be queried: 3f7930 1 1
2011-06-13 17:30:02, Info                  WDS    Network service bfe not running or could not be queried: 3f7a48 1 1
2011-06-13 17:30:02, Info                  WDS    Network service ikeext not running or could not be queried: 3f7930 1 1
2011-06-13 17:30:02, Info                  WDS    Network service mpssvc not running or could not be queried: 3f7a48 1 1
2011-06-13 17:30:03, Info                  WDS    Installing device pci\ven_10ec&dev_8168&rev_01 X:\WINDOWS\INF\netrtx32.inf succeeded
2011-06-13 17:30:06, Info                  WDS    No computer name specified, generating a random name.
2011-06-13 17:30:06, Info                  WDS    Renaming computer to MININT-UIKH6O8.
2011-06-13 17:30:06, Info                  WDS    Acquired profiling mutex
2011-06-13 17:30:06, Info                  WDS    Service winmgmt disable: 0x00000000
2011-06-13 17:30:06, Info                  WDS    Service winmgmt stop: 0x00000000
2011-06-13 17:30:06, Info                  WDS    Service winmgmt enable: 0x00000000
2011-06-13 17:30:06, Info                  WDS    Released profiling mutex
2011-06-13 17:30:06, Info                  WDS    Acquired profiling mutex
2011-06-13 17:30:07, Info                  WDS    Install MS_MSCLIENT: 0x0004a020
2011-06-13 17:30:07, Info                  WDS    Install MS_NETBIOS: 0x0004a020
2011-06-13 17:30:07, Info                  WDS    Install MS_SMB: 0x0004a020
2011-06-13 17:30:07, Info                  WDS    Install MS_TCPIP6: 0x0004a020
2011-06-13 17:30:07, Info                  WDS    Install MS_TCPIP: 0x0004a020
2011-06-13 17:30:07, Info                  WDS    Service dhcp start: 0x00000000
2011-06-13 17:30:07, Info                  WDS    Service lmhosts start: 0x00000000
2011-06-13 17:30:07, Info                  WDS    Service ikeext start: 0x00000000
2011-06-13 17:30:07, Info                  WDS    Service mpssvc start: 0x00000000
2011-06-13 17:30:07, Info                  WDS    Released profiling mutex
2011-06-13 17:30:07, Info                  WDS    Spent 1045ms installing network components
2011-06-13 17:30:11, Info                  WDS    Spent 3198ms installing network drivers
2011-06-13 17:31:12, Info                  WDS    Spent 60903ms confirming network initialization; status 0x003d0002
2011-06-13 17:31:12, Info                  WDS    GetNetworkingInfo: WpeNetworkStatus returned [0x6]. Flags set: WPE_NETWORK_ADAPTER_OPERATIONAL WPE_NETWORK_DHCP_ENABLED  
2011-06-13 17:31:12, Error      [0x0b003f] WDS    StartNetworking: Failed to start networking. Error code [0x800704C6].[gle=0x000000cb]
2011-06-13 17:31:12, Info       [0x0640ae] IBSLIB PublishMessage: Publishing message [WdsClient: Fehler beim Abrufen einer IP-Adresse vom DHCP-Server. Stellen Sie sicher, dass in diesem Netzwerksegment ein funktionierender DHCP-Server in Betrieb ist.]
Thorsten
Find all posts by this user
Quote this message in a reply
2011-06-16, 06:56
Post: #9
viveksubbarao Offline
iPXE User
**
 		Posts: 2
Joined: 2011-Jun
Reputation: 0
RE: Install into iscsi problem
Go through this thread,
http://social.technet.microsoft.com/Foru...c7dd1eb87/

The Windows setup timesout before the network interface gets a DHCP address. Even though you see the ip address, there are some more things the adapter is doing before returning success to the setup process which timesout.

A wireshark trace of the interaction between the DHCP server and the client machine on which you are running iPXE would be of great help if you can provide one.

How is the client machine connected to the DHCP server ? If it is connected through a switch, then try connecting it back to back and see if it gets the DHCP address quickly.
Find all posts by this user
Quote this message in a reply
Post Reply 




User(s) browsing this thread: 1 Guest(s)

Contact Us | iPXE home page | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication