DCHP fail w/ Intel i210 lan port in Boradwell-EP platform
|
2017-08-03, 12:33
Post: #1
|
|||
|
|||
DCHP fail w/ Intel i210 lan port in Boradwell-EP platform
Hi ,
We see a strange behavior w/ ipxe in Intel Broadwell -EP platform (PCH :8900). We have 2 I210 lan w/ NCSI , one is 5:0:0(port 1) another one is 6:0:0(port 2). We can get dhcp ip from dhcp server through port 1 , but port 2 can't get dhcp ip from dhcp server. In Port 2 , ipxe will try to do dhcp discovery and cause timeout w/ debug mode .(error code :28086011 and 040ee119) When I use the tftp server to get pxelinux.0 and boot w/o IPXE , both ports can download image and remote boot correctly. (my dhcp server is Centos 6.6) I also try to use other platform (Broadwell-DE soc) w/ 2 I210 lan w/ NCSI (8086:1533) , one is 8:0:0(port 1) another one is 9:0:0(port 2). Both ports are workable for boot w/ ipxe (dhcp action can be finished). I also find other Broadwell-EP board w/ I210 (PCH:C610),the issue still happen. When I find a Broadwell-EP board w/ I350 (PCH:C610 ), I can boot correctly . (PCIE bdf is 8:0:2 and 8:03) May I have your suggestion or comment ? or someone also saw the same issue before . Thanks! B/R Dennis ===I210 Port 1(Failed port)========================================= CLIENT IP: 192.168.0.31 MASK: 255.255.255.0 DHCP IP: 192.168.0.202 PXE->EB: !PXE at 93B4:0070, entry point at 93B4:0106 UNDI code segment 93B4:5F20, data segment 8D7C:6380 (565-615kB) UNDI device is PCI 06:00.0, type DIX+802.3 565kB free base memory after PXE unload iPXE initialising devices...ok iPXE 1.0.0+ (93665) -- Open Source Network Boot Firmware -- http://ipxe.org Features: DNS HTTP iSCSI TFTP AoE ELF MBOOT PXE bzImage Menu PXEXT net0: 74:fe:48:09:1d4 using undionly on 0000:06:00.0 (open) [Link:up, TX:0 TXE:1 RX:0 RXE:0] [TXE: 1 x "Network unreachable (http://ipxe.org/28086011)"] DHCP 0x1e614 entering discovery state Configuring (net0 74:fe:48:09:1d4)...DHCP 0x1e614 DHCPDISCOVER .DHCP 0x1e614 DHCPDISCOVER .DHCP 0x1e614 DHCPDISCOVER ....DHCP 0x1e614 DHCPDISCOVER ........ No configuration methods succeeded (http://ipxe.org/040ee119) No more network devices pci/ builtin/ smbios/ netX/ net0/ busid.......... 01:80:86:15:33 busloc......... 0x600 bustype........ PCI chip........... undionly ifname......... net0 mac............ 74:fe:48:09:1d4 mtu............ <not specified> gateway........ <not specified> ip............. 192.168.0.31 netmask........ 255.255.255.0 dns............ <not specified> ... ===I210 Port 2(workable port)========================================= CLIENT MAC ADDR: 74 FE 48 09 1D D6 GUID: 8804A5A0 8120 11E4 966F 0202A6D8CD24 CLIENT IP: 192.168.0.48 MASK: 255.255.255.0 DHCP IP: 192.168.0.202 PXE->EB: !PXE at 93B4:0070, entry point at 93B4:0106 UNDI code segment 93B4:5F20, data segment 8D7C:6380 (565-615kB) UNDI device is PCI 05:00.0, type DIX+802.3 565kB free base memory after PXE unload iPXE initialising devices...ok iPXE> dhcp DHCP 0x1e674 entering discovery state Configuring (net0 74:fe:48:09:1d6)...DHCP 0x1e674 DHCPDISCOVER .DHCP 0x1e674 DHCPDISCOVER DHCP 0x1e674 DHCPOFFER from 192.168.0.202:67 for 192.168.0.35 .DHCP 0x1e674 entering request state DHCP 0x1e674 DHCPREQUEST to 192.168.0.202:67 for 192.168.0.35 .DHCP 0x1e674 DHCPACK from 192.168.0.202:67 for 192.168.0.35 ok iPXE> pci/ builtin/ smbios/ netX/ net0/ busid.......... 01:80:86:15:33 busloc......... 0x500 bustype........ PCI chip........... undionly ifname......... net0 mac............ 74:fe:48:09:1d6 mtu............ <not specified> gateway........ <not specified> ip............. 192.168.0.35 netmask........ 255.255.255.0 dns............ <not specified> |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
DCHP fail w/ Intel i210 lan port in Boradwell-EP platform - dennis.huang - 2017-08-03 12:33
RE: DCHP fail w/ Intel i210 lan port in Boradwell-EP platform - NiKiZe - 2017-08-03, 13:29
RE: DCHP fail w/ Intel i210 lan port in Boradwell-EP platform - dennis.huang - 2017-08-07, 12:01
RE: DCHP fail w/ Intel i210 lan port in Boradwell-EP platform - NiKiZe - 2017-08-07, 12:04
RE: DCHP fail w/ Intel i210 lan port in Boradwell-EP platform - dennis.huang - 2017-08-08, 04:37
|
User(s) browsing this thread: 1 Guest(s)