Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Wimboot - Could not boot image: Exec format error
2017-08-30, 16:32 (This post was last modified: 2017-08-30 16:38 by Logan.)
Post: #4
RE: Wimboot - Could not boot image: Exec format error
Thank you, NiKiZe and rweisman, for your helpful comments.

I was finally able to figure it out. As per the instructions in http://ipxe.org/wimboot, I had created a file named boot.ipxe containing all the kernel and initrd commands. But the .ipxe extension is actually not recognized. It should have been .php. That solved the issue.

Now, instead of showing the wrong size (920 bytes), it shows the correct size (250 bytes), and then successfully runs the script.
Quote:Filename: http://x.x.x.x:port/win/boot.php
http://x.x.x.x:port/win/boot.php... Ok
boot.php: 250 bytes [script]
http://x.x.x.x:port/win/wimboot... ok
http://x.x.x.x:port/win/boot/bcd... ok
http://x.x.x.x:port/win/boot/boot.sdi... ok
http://x.x.x.x:port/win/boot.wim... ok

Thanks again for your help!
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Wimboot - Could not boot image: Exec format error - Logan - 2017-08-30 16:32



User(s) browsing this thread: 1 Guest(s)