Post Reply 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
how to build undionly.kkpxe
2011-11-07, 03:55
Post: #5
RE: how to build undionly.kkpxe
(2011-11-05 22:40)dpuckett Wrote:  Well, I have tried everything I can think of. I have my Proliant set to chainload either undionly.kpxe or undionly.kkpxe and the following script.

set keep-san 1
sanhook iscsi:

But it hangs on trying to boot to CD-ROM after this. I have even disabled the onboard NICs and installed an INTEL card with the same results.

Any suggestions?

Falling back to DVD-ROM after a network boot attempt is known to be unreliable on some BIOSes. Since you're using iSCSI and Windows Server 2008, you could try setting up a WDS server: this allows you to perform direct-to-iSCSI installations without using a DVD-ROM. It's simple to set up, and you can find instructions as
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 

Messages In This Thread
RE: how to build undionly.kkpxe - mcb30 - 2011-11-07 03:55

User(s) browsing this thread: 1 Guest(s)