Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Sonnet Twin 10g TB2 Adapter
2018-10-23, 18:06
Post: #8
RE: Sonnet Twin 10g TB2 Adapter
(2018-10-23 01:51)ebruno Wrote:  
(2018-10-19 22:44)NiKiZe Wrote:  ok so it uses the intelx driver.

First, is there any chance that you could test this nic without the thunderbolt in a normal PC?
Just to verify if this is a possible TB issue or not.
If that isn't possible I would start building with DEBUG=intelx and see if that gives any leads
If not then move on to building with DEBUG=intelx:3 instead.

The NIC is in an enclosure that only has thunderbolt connectivity to the enclosure.
I will do some more testing tomorrow with the debug options you suggested.

With intelx:3 set for the debug mode. on the NIC that is plugged in what is reported is:
When first loading:
INTEL 0x6ec07bb0 reset (ctrl 0000000)
INTEL 0x6ec07bb0 has autoloaded NAC address 00:30:09:0c:22:06 at 5400
INTEL 0x6ec07bb0 link status is 30000008
INTEL 0x6ecc86d0 has autoloaded NAC address 00:30:93:0c:22:07 at 0x05400
INTEL 0x6ecc86d0
issue dhcp

INTEL 0x6ec086d0 link status is 60000080

DHCP fails.
Using wireshark to monitor the subnet I never see a DHCP request on the wire.

if I try setting a static ip and do an ifopen net1
links status shows as 60000080
not able to ping interface
ifstat shows interface open, linkup, network unreachable.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Sonnet Twin 10g TB2 Adapter - ebruno - 2018-10-18, 23:33
RE: Sonnet Twin 10g TB2 Adapter - ebruno - 2018-10-23 18:06



User(s) browsing this thread: 2 Guest(s)