The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 807 - File: showthread.php PHP 7.3.15 (Linux)
File Line Function
/showthread.php 807 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
make error when building rom
2012-01-30, 17:08
Post: #1
make error when building rom
I'm having issues while compiling a rom for a Broadcom 57xx series onboard nic.

Code:
root@ubuntu:/home/ubuntu# lspci
00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge Alternate
00:02.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (ext gfx port 0)
00:06.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2)
00:11.0 RAID bus controller: ATI Technologies Inc SB700/SB800 SATA Controller [Non-RAID5 mode] (rev 40)
00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
00:12.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
00:13.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
00:13.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 42)
00:14.1 IDE interface: ATI Technologies Inc SB700/SB800 IDE Controller (rev 40)
00:14.3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host controller (rev 40)
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge (rev 40)
00:16.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
00:16.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
00:18.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control
01:00.0 VGA compatible controller: nVidia Corporation GT218 [GeForce 210] (rev a2)
01:00.1 Audio device: nVidia Corporation High Definition Audio Controller (rev a1)
02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5723 Gigabit Ethernet PCIe (rev 10)
root@ubuntu:/home/ubuntu# lspci -n -s 02:00.0
02:00.0 0200: 14e4:165b (rev 10)
root@ubuntu:/home/ubuntu#


on the machine being used for compiling,

user@user-desktop:~/ipxe/src$ make
===========================================================

To create a bootable floppy, type
    cat bin/ipxe.dsk > /dev/fd0
where /dev/fd0 is your floppy drive.  This will erase any
data already on the disk.

To create a bootable USB key, type
    cat bin/ipxe.usb > /dev/sdX
where /dev/sdX is your USB key, and is *not* a real hard
disk on your system.  This will erase any data already on
the USB key.

To create a bootable CD-ROM, burn the ISO image
bin/ipxe.iso to a blank CD-ROM.

These images contain drivers for all supported cards.  You
can build more customised images, and ROM images, using
    make bin/<rom-name>.<output-format>

===========================================================
user@user-desktop:~/ipxe/src$ make bin/14e4165b.rom
  [LD] bin/14e4165b.rom.tmp
arch/i386/scripts/i386.lds:1: undefined symbol `obj_14e4165b' referenced in expression
make: *** [bin/14e4165b.rom.tmp] Error 1
user@user-desktop:~/ipxe/src$


Any help would be most welcome.

Regards,

R Wink
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
make error when building rom - AnRkey - 2012-01-30 17:08



User(s) browsing this thread: 1 Guest(s)