The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 807 - File: showthread.php PHP 7.3.15 (Linux)
File Line Function
/showthread.php 807 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[solved] debian buster - netinstall - uefi
2019-10-17, 17:09 (This post was last modified: 2019-10-20 14:59 by fred.)
Post: #1
[solved] debian buster - netinstall - uefi
Hello,
Me again...

My preseed conf is not load.

Code:
:debian-amd64-auto
kernel http://debian.proxad.net/debian/dists/stable/main/installer-amd64/current/images/netboot/debian-installer/amd64/linux initrd=initrd.gz initrd=preseed
initrd http://debian.proxad.net/debian/dists/stable/main/installer-amd64/current/images/netboot/debian-installer/amd64/initrd.gz
initrd http://cdimage.debian.org/cdimage/unofficial/non-free/firmware/stable/current/firmware.cpio.gz
initrd --name preseed http://192.168.10.118/standard.cfg preseed.cfg
prompt Press any key
boot

I have install screen but I preseed not take effect.

Code:
# Préconfigurer la locale seule définit la langue, le pays et la locale.
d-i debian-installer/locale string fr_FR.UTF-8

# Choix du clavier :
d-i keyboard-configuration/xkb-keymap select fr(latin9)

#Réseau
d-i netcfg/choose_interface select auto

# Nom imposé
#d-i netcfg/hostname string somehost

# Supprimer le dialogue irritant sur la clé WEP.
d-i netcfg/wireless_wep string

# Drivers non libre si besoin pour le réseau
d-i hw-detect/load_firmware boolean true

### Configuration du mirroir français
d-i mirror/protocol string ftp
d-i mirror/ftp/hostname string ftp.fr.debian.org
d-i mirror/ftp/directory string /debian
d-i mirror/ftp/proxy string

# compte root (l'utilisateur ordinaire utilisera sudo).
d-i passwd/root-login boolean true
d-i passwd/root-password-crypted password xxxx

# Vous pouvez aussi présélectionner le nom de l'utilisateur
d-i passwd/username string ubuntu
d-i passwd/user-password-crypted password xxxx


# Cette commande permet de régler l'horloge matérielle sur UTC :
d-i clock-setup/utc boolean true

# Vous pouvez mettre toute valeur acceptée pour $TZ.
# Voyez ce que contient /usr/share/zoneinfo/ pour les valeurs possibles.
d-i time/zone string Europe/Paris

# La ligne suivante autorise l'utilisation de NTP pour régler l'horloge
# pendant l'installation :
d-i clock-setup/ntp boolean true

#Partition
d-i partman-auto/method string crypto
d-i partman-lvm/device_remove_lvm boolean true
d-i partman-lvm/confirm boolean true
d-i partman-auto-lvm/guided_size string max
d-i partman-auto-lvm/new_vg_name string crypt
d-i partman-auto/disk string /dev/sda
d-i partman-auto/choose_recipe select root-encrypted
d-i partman-auto/expert_recipe string                         \
      root-encrypted ::                                       \
              40 50 100 ext3                                  \
                      $primary{ } $bootable{ }                \
                      method{ format } format{ }              \
                      use_filesystem{ } filesystem{ ext4 }    \
                      mountpoint{ /boot }                     \
              .                                               \
              1000 1000 100% linux-swap                       \
                      $lvmok{ } lv_name{ swap }               \
                      in_vg { crypt }                         \
                      $primary{ }                             \
                      method{ swap } format{ }                \
              .                                               \
              500 10000 1000000000 ext4                       \
                      $lvmok{ } lv_name{ root }               \
                      in_vg { crypt }                         \
                      $primary{ }                             \
                      method{ format } format{ }              \
                      use_filesystem{ } filesystem{ ext4 }    \
                      mountpoint{ / }                         \
              .                                               \
              500 2000 5120 ext4                       \
                      $lvmok{ } lv_name{ root }               \
                      in_vg { crypt }                         \
                      $primary{ }                             \
                      method{ format } format{ }              \
                      use_filesystem{ } filesystem{ ext4 }    \
                      mountpoint{ /var/log }                         \

#paquets
tasksel tasksel/first multiselect standard, ssh-server
d-i pkgsel/include string vim,curl,net-tools,whois,htop,tmux,python3,sudo

#amorçage
d-i grub-installer/only_debian boolean true
d-i grub-installer/bootdev string default

#creation de l'authorized_key
d-i preseed/late_command string \


# Pour éviter le dernier message disant que l'installation est terminée :
d-i finish-install/reboot_in_progress note

Any idea?
Thanks
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[solved] debian buster - netinstall - uefi - fred - 2019-10-17 17:09
RE: preseed debian buster - NiKiZe - 2019-10-18, 12:59
RE: preseed debian buster - fred - 2019-10-19, 08:38
RE: preseed debian buster - fred - 2019-10-20, 14:57



User(s) browsing this thread: 1 Guest(s)