iPXE discussion forum / iPXE user forums / General v / HP Gen8 fail to boot winpe by ipxe

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
HP Gen8 fail to boot winpe by ipxe
2013-11-14, 11:50
Post: #6
mcb30 Offline
Lead Developer
*******
 		Posts: 543
Joined: 2011-Apr
Reputation: 30
RE: HP Gen8 fail to boot winpe by ipxe: Enter bootmgr.exe with parameters at 0x240b4
(2013-11-13 03:18)zhang_liang Wrote:  It's not the missing font caused this problem, in fact I make taht HP Gen7 server boot winpe successfully, but it failed for HP Gen8.

You will probably need to update the BCD to enable Windows kernel debugging, and use windbg to find out what is happening. (Hopefully the problem occurs after the Windows kernel starts up; if not then you may also need to enable debugging of bootmgr.exe as well.)

Michael
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: HP Gen8 fail to boot winpe by ipxe: Enter bootmgr.exe with parameters at 0x240b4 - mcb30 - 2013-11-14 11:50



User(s) browsing this thread: 1 Guest(s)

Contact Us | iPXE home page | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication