Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
HP Gen8 fail to boot winpe by ipxe
2013-11-15, 07:13
Post: #7
RE: HP Gen8 fail to boot winpe by ipxe
(2013-11-14 08:54)robinsmidsrod Wrote:  It could be a compatibility issue with wimboot and the HP G8, it could also be a issue with bootmgr and the G8.

Have you confirmed that Microsoft's traditional WDSNBP netboot works with the G8? If it does, then there is possibly an issue in wimboot. If it doesn't, then you should be talking with Microsoft or HP about it, most likely HP.

Have you checked for a BIOS update for the G8?

Unfortunately, this is not an easy problem to tackle without access to the hardware. You might need to venture deep into Windows debugging land to find your answers.

Thank you for the reply, it could be traditional pxe boot but failed when it comes to ipxe.
In fact, not only HP gen8 server, another kind brand of server encount the same issue.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: HP Gen8 fail to boot winpe by ipxe - zhang_liang - 2013-11-15 07:13



User(s) browsing this thread: 2 Guest(s)