Issues with some Network Cards

[sujan54004]

Hi,

I've been having issues booting up with some network controllers like Marvell Yukon 88E8055 PCI-E Gigabit Ethernet Controller (10/100/1000MBit). The system finds the dhcp IP address and gets into ipxe but it gets stuck while trying to get the link up (net0).

Looks like this:

iPXE initialising devices...ok

iPXE 1.0.0+ (e0478) -- Open Source Network Boot Firmware -- http://ipxe.org
Features: HTTP iSCSI DNS TFTP AoE SRP bzImage ELF MBOOT PXE PXEXT Menu

net 0 :00:17:42:c8:0c:8c:8e using m88e8055 on PCI00:00.0 (open)
[Link: down, TX:0 TXE:0 RX:0 RXE:0]
[Link status: Down (http:/ipxe.org/38086101)]
Waiting for link-up on net0.............. --- Gets stuck here ---

Thanks in advance,
Sujan