Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
kernel boot failure with ipxe on uefi mode
2015-09-16, 18:03 (This post was last modified: 2015-09-16 18:07 by NiKiZe.)
Post: #8
RE: kernel boot failure with ipxe on uefi mode
(2015-08-19 23:03)allenb Wrote:  I'm running into the same issue, including the desire to use HP tools.

Trying to boot CentOS 6.6. Have adopted kernel-lt from elrepo which is 3.10 and supports EFI. My problem comes when trying to mount the root filesystem. Any ideas or debugging suggestions will be appreciated!

Thanks,
Allen

In http://forum.ipxe.org/showthread.php?tid=7756 you can find this:
(2015-06-25 17:24)mcb30 Wrote:  I think you're hitting a known bug in pre-3.16 kernels. Try upgrading to a newer kernel.

Michael

So make sure it is an 3.16 or later kernel and try again.
I also know mcb30 have posted the link to that issue and patch that was added in 3.16 - but can't find it right now.
Also you posted a new thread about CentOS 7 - but no information about which kernel version is was (or atleast not as far as i could tell)

Sorry my bad about your other thread, was just hard to see, will just quote relevant part here for reference.
(2015-09-16 17:47)allenb Wrote:  [ 4.178291] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
[ 4.218363] CPU: 6 PID: 1 Comm: swapper/0 Not tainted 3.10.0-229.14.1.el7.x86_64 #1

Use GitHub Discussions
VRAM bin
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: kernel boot failure with ipxe on uefi mode - NiKiZe - 2015-09-16 18:03



User(s) browsing this thread: 1 Guest(s)