Post Reply 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Windows Server 2012 R2 iSCSI boot
2015-04-23, 20:19
Post: #5
RE: Windows Server 2012 R2 iSCSI boot
The things below is from my experience with AoE and other things and not iSCSI so it might be non issues, but maybe worth trying.

2 things that need to work when the windows kernel takes over from ipxe is that the network driver have been loaded and started and that the iscsi service is started.

It could be that the driver is installed in winpe but not installed in the actual image before first reboot, or that the start mode for the service is not 0.

Maybe double check that drivers are installed in the second stage of installation by installing to local storage and using Shift+F10 to bring up compmgmt.msc
Another alternative is to use dism and force install the drivers into install.wim

Use GitHub Discussions
VRAM bin
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 

Messages In This Thread
RE: Windows Server 2012 R2 iSCSI boot - NiKiZe - 2015-04-23 20:19

User(s) browsing this thread: 1 Guest(s)