Slow ipxe.efi startup

[stichnot]

I have an ECS Liva which only supports UEFI booting. I am building and installing bin-x86_64-efi/ipxe.efi, and the "initialising devices..." step takes 20+ seconds to complete. I'd like to improve that.

lspci reports the following network hardware:

Code:

03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 0c)

Using snp.efi or snponly.efi is much faster, but then dhcp fails, presumably because it thinks the MAC address is 01:01:01:01:...

I added a printf() inside the startup() loop in init.c. This printf is invoked 4 times (not sure how to get the name of the startup functions being called). The third startup function is the one that takes 20 seconds.

I tried several DEBUG options based on other posts here, up to the following:

Code:

DEBUG=efi_driver,efi_pci,snp,snpnet,snponly,efi_init,realtek,netdevice

but still nothing is printed during this 20 second period.

Any ideas on how to speed this up, or diagnose where the 20 seconds is being spent?

[robinsmidsrod]

I think you should take this question to the developer mailing-list or IRC. It seems like a driver or UEFI platform issue.