Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
How to build ipxelinux.0
2016-02-11, 19:13
Post: #1
How to build ipxelinux.0
I've tried to follow the instructions here https://coderwall.com/p/0sq9gg/how-to-build-ipxelinux-0 for building ipxelinux.0 but keep getting failures at every stage.

Is there a recommended Linux distribution where I can run

git clone git://git.ipxe.org/ipxe.git
git clone git://git.kernel.org/pub/scm/boot/syslinux/syslinux.git

cd syslinux
make


and avoid getting constant missing headers and suchlike?

Ideally I 'd like to run this on FreeBSD but it looks as though the makefiles aren't compatible with FreeBSD's build system.
Find all posts by this user
Quote this message in a reply
2016-02-11, 21:46
Post: #2
RE: How to build ipxelinux.0
(2016-02-11 19:13)balanga Wrote:  I've tried to follow the instructions here https://coderwall.com/p/0sq9gg/how-to-build-ipxelinux-0 for building ipxelinux.0 but keep getting failures at every stage.

Is there a recommended Linux distribution where I can run

git clone git://git.ipxe.org/ipxe.git
git clone git://git.kernel.org/pub/scm/boot/syslinux/syslinux.git

cd syslinux
make


and avoid getting constant missing headers and suchlike?

Ideally I 'd like to run this on FreeBSD but it looks as though the makefiles aren't compatible with FreeBSD's build system.

Does

Code:
git clone git://git.ipxe.org/ipxe.git
cd ipxe/src
make

Work without any problem? if not what is the output?

any recent linux should work, you could probably even use systemrescuecd or just a minimal gentoo stage3

(Creating a minimal, clean, public, ipxe bootable environment for building ipxe is still on my todo list)

Use GitHub Discussions
VRAM bin
Visit this user's website Find all posts by this user
Quote this message in a reply
2016-02-12, 00:16
Post: #3
RE: How to build ipxelinux.0
(2016-02-11 21:46)NiKiZe Wrote:  Does

Code:
git clone git://git.ipxe.org/ipxe.git
cd ipxe/src
make

Work without any problem? if not what is the output?

any recent linux should work, you could probably even use systemrescuecd or just a minimal gentoo stage3

(Creating a minimal, clean, public, ipxe bootable environment for building ipxe is still on my todo list)

That did work and I managed to create ipxe.pxe, ipxe.iso, ipxe.usb, ipxe.lkrn, ipxe.dsk.

I'm not sure what any of them do but I put the ipxe.pxe in the root path of my tftp server.
ipxe.pxe did boot but then stopped with:-

Code:
Next server: 192.168.1.1
Filename: ipxe.pxe
Root path: tftpboot
Ignoring unsupported root path
tftp://192.168.1.1/ipxe.pxe... ok
ipxe.pxe : 306366 bytes [PXE-NBP]

The root path provided worked fine with PXELINUX.

I was, however, able to get to an ipxe prompt and boot using http://boot.ipxe.org/demo/boot.php
Find all posts by this user
Quote this message in a reply
Post Reply 




User(s) browsing this thread: 1 Guest(s)