Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
iPXE, iSCSI and int13
2016-03-10, 19:34
Post: #6
RE: iPXE, iSCSI and int13
build ipxe with make bin/ipxe.pxe DEBUG=int13:3
(rom-o-matic does not always do the correct thing, so local build box is always best for debugging)

most likely you will hit the "drive %02x does not contain a valid MBR" line here : https://git.ipxe.org/ipxe.git/blob/maste...13.c#l1778

You might also want to do a packet capture to check out that the blocks that iPXE receives actually contains what you expect them to contain.

Use GitHub Discussions
VRAM bin
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
iPXE, iSCSI and int13 - mr_jrt - 2016-03-07, 00:55
RE: iPXE, iSCSI and int13 - mcb30 - 2016-03-07, 23:44
RE: iPXE, iSCSI and int13 - mr_jrt - 2016-03-07, 23:53
RE: iPXE, iSCSI and int13 - mr_jrt - 2016-03-09, 00:48
RE: iPXE, iSCSI and int13 - mr_jrt - 2016-03-10, 01:58
RE: iPXE, iSCSI and int13 - NiKiZe - 2016-03-10 19:34
RE: iPXE, iSCSI and int13 - mr_jrt - 2016-03-11, 02:14
RE: iPXE, iSCSI and int13 - mr_jrt - 2016-03-12, 00:21
RE: iPXE, iSCSI and int13 - mcb30 - 2016-03-12, 03:17
RE: iPXE, iSCSI and int13 - mr_jrt - 2016-03-12, 13:32
RE: iPXE, iSCSI and int13 - mcb30 - 2016-03-12, 14:02
RE: iPXE, iSCSI and int13 - mr_jrt - 2016-03-12, 15:47



User(s) browsing this thread: 1 Guest(s)