Flash iPXE to PCI NIC SysKonnect SK-9521 V2.0

[Gelip]

OK, they managed to safely flash iPXE using YUKONDG.EXE

You need to do:

• on rom-o-matic.eu generate ROM iPXE PCI VENDOR CODE: 1148 PCI DEVICE CODE: 4320
• enlarge the file 11484320.rom to 128KB fill values FF
• make USB stick bootable GRUB4DOS with MS-DOS floppy image which contains MS-DOS USB drivers for write possible on USB stick
• copy yukondg.exe utility and 11484320.rom to USB stick
• boot PC from USB stick
• run yukondg.exe
• make backup current flash content to file e.g. backup.bin (128KB)
• flash backup.bin to test if the flash is in fact a multiple programmable (it is not the OTP)
• flash new firmware iPXE select file 11484320.rom
  

Now boot from ROM iPXE works well.