problem with iscsi via nas

[robinsmidsrod]

You didn't clearly specify which menu option you were using. You just said windows didn't boot. Based on the fact that you're using my menu I'm going to assume you're using the "Boot Windows7 from iSCSI" on the initial menu. That option won't work without actually _installing_ Windows 7 to the iSCSI volume.

You should be able to find examples of how to install Windows 7 in the "Installer" menu, which you seem to also have kept in there. Just remember that once you boot up the WinPE in the menu, you also need to run the Windows installer from a SMB file share somewhere.

If the iSCSI volume doesn't show up during disk partitioning, then you most likely have the same problem a bunch of other people have had before you, namely the problem with the default gateway in the iBFT description. See the stickied post on the front page for a solution.