The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 807 - File: showthread.php PHP 7.3.15 (Linux)
File Line Function
/showthread.php 807 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
problem with iscsi via nas
2013-04-30, 19:58
Post: #1
problem with iscsi via nas
good evening

i have a nas synology ds 212+
i have made a dhcp server via the synology.
i made an iscsi target named iqn.2000-01.com.synology:test.boot.windows7

i have created on las the folder
ftfproot... i have compiled undionly.kpxe file correctly.

my server is at adress 10.0.0.7

when i start via virtual box a machine that boot via lan and i arrive at the menu... indicating the possibility to boot windows...

but nothing happen.. the windows7 start doesnt' start...

THIS IS MY BOOTSTRAP.IPXE

#!ipxe

set boot-url tftp://10.0.0.7
set bootstrap-url ${boot-url}/bootstrap
set menu-url ${boot-url}/menu.ipxe

# Boot <boot-url>/bootstrap/hostname-<hostname>.ipxe
# if hostname DHCP variable is set and script is present
isset ${hostname} && chain --replace --autofree ${bootstrap-url}/hostname-${hostname}.ipxe && exit ||

# Boot <boot-url>/bootstrap/uuid-<UUID>.ipxe
# if uuid SMBIOS variable is set and script is present
isset ${uuid} && chain --replace --autofree ${bootstrap-url}/uuid-${uuid}.ipxe && exit ||

# Boot <boot-url>/bootstrap/mac-01-02-03-04-05-06.ipxe if script is present
chain --replace --autofree ${bootstrap-url}/mac-${mac:hexhyp}.ipxe && exit ||

# Boot <boot-url>/bootstrap/bus-01-80-86-10-0e.ipxe if PCI Intel adapter
# is present and script is present
chain --replace --autofree ${bootstrap-url}/bus-${busid:hexhyp}.ipxe && exit ||

# Boot <boot-url>/menu.ipxe script if all other options have been exhausted
chain --replace --autofree ${menu-url}


AND THIS THE MENU.IPXE

#!ipxe

# boot-url is set in bootstrap.ipxe

# Setup some basic convenience variables
set menu-timeout 5000
set submenu-timeout ${menu-timeout}
set base-iqn iqn.2000-01.com.synology
set base-iscsi iscsi:10.0.0.7::::${base-iqn}

# Set initiator-iqn to either hostname or mac
isset ${hostname} && set initiator-iqn ${base-iqn}:${hostname} || set initiator-iqn ${base-iqn}:${mac}

# Ensure we have menu-default set to something
isset ${menu-default} || set menu-default exit

###################### MAIN MENU ####################################

:start
menu iPXE boot menu for ${initiator-iqn}
item --gap -- ------------------------- Operating systems ------------------------------
item --key f freedos Boot FreeDOS from iSCSI
item --key m msdos Boot MS-DOS from iSCSI
item --key u ubuntu Boot Ubuntu from iSCSI
item --key v vmware Boot VMware ESXi from iSCSI
item --key w windows7 Boot Windows 7 from iSCSI
item --key l menu-live Live environments...
item --gap -- ------------------------- Tools and utilities ----------------------------
item --key p pxelinux Load PXELinux menu
item --key r menu-recovery Recovery tools...
item --key d menu-diag Diagnostics tools...
item --key i menu-install Installers...
item --gap -- ------------------------- Advanced options -------------------------------
item --key c config Configure settings
item shell Drop to iPXE shell
item reboot Reboot computer
item
item --key x exit Exit iPXE and continue BIOS boot
choose --timeout ${menu-timeout} --default ${menu-default} selected || goto cancel
set menu-timeout 0
goto ${selected}

:cancel
echo You cancelled the menu, dropping you to a shell

:shell
echo Type exit to get the back to the menu
shell
set menu-timeout 0
set submenu-timeout 0
goto start

:failed
echo Booting failed, dropping to shell
goto shell

:reboot
reboot

:exit
exit

:config
config
goto start

:back
set submenu-timeout 0
clear submenu-default
goto start

############ MAIN MENU ITEMS ############

:freedos
echo Booting FreeDOS from iSCSI for ${initiator-iqn}
set root-path ${base-iscsi}:${hostname}.boot.freedos
sanboot ${root-path} || goto failed
goto start

:msdos
echo Booting MS-DOS from iSCSI for ${initiator-iqn}
set root-path ${base-iscsi}:${hostname}.boot.msdos
sanboot ${root-path} || goto failed
goto start

:ubuntu
echo Booting Ubuntu from iSCSI for ${initiator-iqn}
set root-path ${base-iscsi}:${hostname}.boot.ubuntu
sanboot ${root-path} || goto failed
goto start

:vmware
echo Booting VMware ESXi from iSCSI for ${initiator-iqn}
set root-path ${base-iscsi}:${hostname}.boot.vmware
sanboot ${root-path} || goto failed
goto start

:windows7
echo Booting Windows 7 from iSCSI for ${initiator-iqn}
set root-path ${base-iscsi}:${hostname}.boot.windows7
sanboot ${root-path} || goto failed
goto start

:pxelinux
set 210:string tftp://${next-server}/
chain ${210:string}pxelinux.0 || goto failed
goto start

###################### RECOVERY MENU ################################

:menu-recovery
menu Recovery tools
item sysrcd SystemRescueCD 2.6.0
item spinrite SpinRite 6.0
item spinrite-msdos SpinRite 6.0 (using MS-DOS 6.22)
item macrium-winpe Macrium Reflect 5.0 Rescue CD (WinPE 3.1)
item macrium-linux Macrium Reflect 5.0 Rescue CD (Linux)
item macrium-wimboot Macrium Reflect 5.0 Rescue CD (WinPE 3.1 via wimboot)
item
item --key x back Back to top menu...
iseq ${menu-default} menu-recovery && isset ${submenu-default} && goto menu-recovery-timed ||
choose selected && goto ${selected} || goto start
:menu-recovery-timed
choose --timeout ${submenu-timeout} --default ${submenu-default} selected && goto ${selected} || goto start

:spinrite
sanboot --no-describe --drive 0x00 ${boot-url}/spinrite-6.0/spinrite-6.0.img || goto failed
#sanboot --no-describe --drive 0x081 ${boot-url}/spinrite-6.0/spinrite-6.0.iso
#initrd ${boot-url}/spinrite/spinrite-6.0.img
#chain ${boot-url}/memdisk
goto start

:spinrite-msdos
sanboot --no-describe --drive 0x00 ${boot-url}/spinrite-6.0/spinrite-6.0-msdos.img || goto failed
goto start

:sysrcd
echo Booting SystemRescueCD 2.6.0 x86 for ${initiator-iqn}
# Fixup needed after copying files from downloaded ISO to directory:
# cd path/to/sysrcd-iso-unpacked-files/isolinux && \
# perl -p -i -e 's{/bootdisk}{../bootdisk}' isolinux.cfg && \
# perl -p -i -e 's{scandelay=1}{scandelay=1 dodhcp nfsboot=nas.smidsrod.lan:/raid/boot/sysrcd-2.6.0-x86}' isolinux.cfg && \
# perl -p -i -e 's{rescuecd_us}{rescuecd_no}; s{US}{NO}; s{setkmap=us}{setkmap=no}; s{american}{norwegian};' isolinux.cfg && \
# cd -
# PXELinux options, see http://syslinux.zytor.com/wiki/index.php/PXELINUX for details
set 210:string ${boot-url}/sysrcd-2.6.0-x86/isolinux/
set 209:string isolinux.cfg
set filename ${210:string}pxelinux.0
chain ${filename} || goto failed
goto start

:macrium-winpe
sanboot --no-describe ${boot-url}/macrium-5.0/macrium-5.0-rescue-winpe-3.1.iso || goto failed
goto start

:macrium-linux
sanboot --no-describe ${boot-url}/macrium-5.0/macrium-5.0-rescue-linux.iso || goto failed
goto start

:macrium-wimboot
echo Booting Macrium Reflect 5.0 (WinPE 3.1) for ${initiator-iqn}
set base-url ${boot-url}/macrium-5.0/wimboot/
kernel ${boot-url}/wimboot
initrd ${base-url}bootmgr bootmgr
initrd ${base-url}boot/bcd BCD
initrd ${base-url}boot/boot.sdi boot.sdi
initrd ${base-url}sources/boot.wim boot.wim
boot || goto failed
goto start

###################### DIAGNOSTICS MENU #############################

:menu-diag
menu Diagnostic tools
item hdt HDT 0.5.0
item memtest Memtest86+ 4.20
item memtestnbp Memtest86+ 4.20 (iPXE)
item breakin Breakin 3.71
item dban Darik's Boot and Nuke 2.2.6
item etdump Bart's etdump 1.2
item wdcdiag Western Digital Diagnostics 5.04f
item
item --key x back Back to top menu...
iseq ${menu-default} menu-diag && isset ${submenu-default} && goto menu-diag-timed ||
choose selected && goto ${selected} || goto start
:menu-diag-timed
choose --timeout ${submenu-timeout} --default ${submenu-default} selected && goto ${selected} || goto start

:hdt
sanboot --no-describe ${boot-url}/hdt-0.5.0.iso || goto failed
goto start

:memtest
chain ${boot-url}/memtest86+-4.20.elf.img - || goto failed
goto start

:memtestnbp
chain ${boot-url}/memtest.0 passes=1 && set memtest GOOD || set memtest BAD
set memtest_errno ${errno}
iseq ${memtest} GOOD && goto memtest-info ||
iseq ${memtest_errno} 0x1 && set memtest BAD || set memtest UNKNOWN
:memtest-info
menu Your memory seems to be ${memtest}
item memtest-report Report memtest result to web service
item menu-diag Back to diagnostics menu...
choose --default menu-diag selected && goto ${selected} || goto start

:memtest-report
chain ${boot-url}/memtest-report.cgi?result=${memtest}&mac=${mac}&uuid=${uuid}&hostname=${hostname} ||
goto menu-diag

:breakin
# Stress-testing and diagnostics utility
# http://www.advancedclustering.com/software/breakin.html
# Set sshpasswd=yourpassword for remote access
# Set startup= to 'cloner' or 'rescue' for more features
# When startup=cloner, server= and image= can also be set
# http://www.advancedclustering.com/software/cloner.html
kernel ${boot-url}/breakin-3.71/kernel-3.71
initrd ${boot-url}/breakin-3.71/initrd-3.71.cpio.lzma
imgargs kernel-3.71 startup=breakin
boot || goto failed
goto start

:dban
sanboot --no-describe ${boot-url}/dban-2.2.6-i586.iso || goto failed
goto start

:etdump
# Booting it with memdisk makes it read/write, while sanboot forces read/only
#sanboot --drive 0x00 ${boot-url}/freedos-etdump-floppy.img
initrd ${boot-url}/freedos-etdump-floppy.img
chain ${boot-url}/memdisk || goto failed
goto start

:wdcdiag
# Extracted the bootable floppy image from diag-5.04f.iso
sanboot --drive 0x00 ${boot-url}/western-digital/diag-5.04f.img || goto failed
goto start

############################ INSTALLER MENU #########################

:menu-install
menu Installers for ${initiator-iqn}
item freedos-install Install FreeDOS 1.1 to iSCSI
item msdos-install Install MS-DOS 6.22 to iSCSI
item ubuntu-install-amd64 Install Ubuntu 12.04 amd64 to iSCSI
item ubuntu-install-i386 Install Ubuntu 12.04 i386 to iSCSI
item windows7-install Install Windows 7 to iSCSI
item vmware-x64-install Install VMware ESXi 5.0 (x64) to iSCSI
item vmware-x86-install Install VMware ESXi 3.5 (x86) to iSCSI
item winpe Hook Windows 7 iSCSI and boot WinPE
item winpe-wimboot Boot WinPE using wimboot
item ubuntu-installer-amd64-remote Install Ubuntu 12.04 amd64 from public archive
item ubuntu-installer-i386-remote Install Ubuntu 12.04 i386 from public archive
item ubuntu-install-amd64-local Install Ubuntu 12.04 amd64 to local drive(s)
item ubuntu-install-i386-local Install Ubuntu 12.04 i386 to local drive(s)
item xenclient-install Install XenClient 2.1 to local drive
item
item --key x back Back to top menu...
iseq ${menu-default} menu-install && isset ${submenu-default} && goto menu-install-timed ||
choose selected && goto ${selected} || goto start
:menu-install-timed
choose --timeout ${submenu-timeout} --default ${submenu-default} selected && goto ${selected} || goto start

:freedos-install
echo Booting FreeDOS 1.1 installer to iSCSI for ${initiator-iqn}
set root-path ${base-iscsi}:${hostname}.boot.freedos
sanhook ${root-path} || goto failed
sanboot --drive 0x81 ${boot-url}/freedos-1.1/fd11src.iso || goto failed
goto start

:msdos-install
echo Booting MS-DOS 6.22 installer to iSCSI for ${initiator-iqn}
set root-path ${base-iscsi}:${hostname}.boot.msdos
sanhook ${root-path} || goto failed
sanboot --no-describe --drive 0x00 ${boot-url}/msdos-6.22/disk1.img || goto failed
goto start

:ubuntu-install-amd64
echo Starting Ubuntu 12.04 amd64 installer for ${initiator-iqn}
# Hook iSCSI drive
set root-path ${base-iscsi}:${hostname}.boot.ubuntu
#sanhook ${root-path} || goto failed
# Start ubuntu-installer. Remember that the iSCSI target must be writable
# by anyone, as debian-installer generates a randomized initiator-iqn in
# /etc/iscsi/initiatorname.iscsi
# The preseed script used takes care of rewriting it to the
# hostname-based IQN used in this script.
# This kernel param which open-iscsi README.Debian mentions doesn't work
# inside debian-installer, unfortunately: iscsi_initiator=${initiator-iqn}
# Hard workaround available here:
# http://umfcloudpilot.eduserv.org.uk/entr...ntu-server
set base-url ${boot-url}/ubuntu-12.04-server-amd64
kernel ${base-url}/install/netboot/ubuntu-installer/amd64/linux
initrd ${base-url}/install/netboot/ubuntu-installer/amd64/initrd.gz
imgargs linux auto=true fb=false url=${base-url}/./preseed.cfg DEBCONF_DEBUG=5 netcfg/get_hostname=${hostname} partman-iscsi/login/address=10.1.1.10 partman-iscsi/login/targets=${base-iqn}:${hostname}.boot.ubuntu partman-iscsi/login/username=${username} partman-iscsi/login/password=${password}
boot || goto failed
goto start

:ubuntu-install-i386
echo Starting Ubuntu 12.04 i386 installer for ${initiator-iqn}
# Hook iSCSI drive
set root-path ${base-iscsi}:${hostname}.boot.ubuntu
sanhook ${root-path} || goto failed
# Start ubuntu-installer. Remember that the iSCSI target must be writable
# by anyone, as debian-installer generates a randomized initiator-iqn in
# /etc/iscsi/initiatorname.iscsi
# The preseed script used takes care of rewriting it to the
# hostname-based IQN used in this script.
# This kernel param which open-iscsi README.Debian mentions doesn't work
# inside debian-installer, unfortunately: iscsi_initiator=${initiator-iqn}
# Hard workaround available here:
# http://umfcloudpilot.eduserv.org.uk/entr...ntu-server
set base-url ${boot-url}/ubuntu-12.04-server-i386
kernel ${base-url}/install/netboot/ubuntu-installer/i386/linux
initrd ${base-url}/install/netboot/ubuntu-installer/i386/initrd.gz
imgargs linux auto=true fb=false url=${base-url}/./preseed.cfg DEBCONF_DEBUG=5 netcfg/get_hostname=${hostname} partman-iscsi/login/address=10.1.1.10 partman-iscsi/login/targets=${base-iqn}:${hostname}.boot.ubuntu partman-iscsi/login/username=${username} partman-iscsi/login/password=${password}
boot || goto failed
goto start

:ubuntu-install-amd64-local
echo Starting Ubuntu 12.04 amd64 local installer for ${initiator-iqn}
set base-url ${boot-url}/ubuntu-12.04-server-amd64
kernel ${base-url}/install/netboot/ubuntu-installer/amd64/linux
initrd ${base-url}/install/netboot/ubuntu-installer/amd64/initrd.gz
imgargs linux auto=true fb=false url=${base-url}/./preseed.cfg
boot || goto failed
goto start

:ubuntu-install-i386-local
echo Starting Ubuntu 12.04 i386 local installer for ${initiator-iqn}
set base-url ${boot-url}/ubuntu-12.04-server-i386
kernel ${base-url}/install/netboot/ubuntu-installer/i386/linux
initrd ${base-url}/install/netboot/ubuntu-installer/i386/initrd.gz
imgargs linux auto=true fb=false url=${base-url}/./preseed.cfg
boot || goto failed
goto start

:windows7-install
echo Starting Windows 7 x64 installer for ${initiator-iqn}
# Hook iSCSI drive
set root-path ${base-iscsi}:${hostname}.boot.windows7
sanhook ${root-path} || goto failed
# Start Windows 7 installer DVD
sanboot --no-describe --drive 0x81 ${boot-url}/windows-7/ultimate-x64.iso || goto failed
# Better solution, according to Oliver Rath on the mailing-list
# Requires massive amounts of RAM, though
#initrd ${boot-url}/windows-7/ultimate-x64.iso
#chain ${boot-url}/memdisk iso raw || goto failed
goto start

:vmware-x64-install
echo Booting VMware 64-bit installer for ${initiator-iqn}
set root-path ${base-iscsi}:${hostname}.boot.vmware
sanhook ${root-path} || goto failed
initrd ${boot-url}/vmware/vmware-esxi-5.0-x64.iso
chain ${boot-url}/memdisk iso || goto failed
goto start

:vmware-x86-install
echo Booting VMware 32-bit installer for ${initiator-iqn}
set root-path ${base-iscsi}:${hostname}.boot.vmware
sanhook ${root-path} || goto failed
initrd ${boot-url}/vmware/vmware-esxi-3.5-x86.iso
chain ${boot-url}/memdisk iso || goto failed
goto start

:winpe
echo Booting Windows PE x64 installer for ${initiator-iqn}
echo (for installing Windows 7)
set root-path ${base-iscsi}:${hostname}.boot.windows7
sanhook ${root-path} || goto failed

# Remember to map the install volume with the following command:
# net use y: \\nas\wds /user:NAS\robin
# Use Y:\Operating Systems\Windows 7 x64\setup.exe to install

# Boots WinPE via native MS TFTP support
#chain tftp://${next-server}/%5CBoot%5CPXE%5Cpxeboot.n12
# Better solution, according to Oliver Rath on the mailing-list
# Requires decent amounts of RAM, though
# Details on how to generate winpe-x64.iso from you Windows 7 install DVD
# can be found here: http://technet.microsoft.com/en-us/libra...10%29.aspx
initrd ${boot-url}/windows-7/winpe-x64.iso
chain ${boot-url}/memdisk iso raw || goto failed
goto start

:winpe-wimboot
echo Booting Windows PE x64 installer for ${initiator-iqn}
#echo (for installing Windows 7)
set root-path ${base-iscsi}:${hostname}.boot.windows7
sanhook ${root-path} || goto failed

# Remember to map the install volume with the following command:
# net use y: \\nas\wds /user:NAS\robin
# Use Y:\Operating Systems\Windows 7 x64\setup.exe to install

# Boots WinPE via iPXE wimboot binary
# BCD is from http://www.fensystems.co.uk/~mcb30/BCD
# wimboot prebuilt from http://www.fensystems.co.uk/~mcb30/wimboot
# source at http://git.ipxe.org/wimboot.git
# bootmgr.exe from the same package that enables PXE booting for Windows
# (most likely WDS tools)
set base-url ${boot-url}/winpe
cpuid --ext 29 && set arch amd64 || set arch x86
kernel ${boot-url}/wimboot
initrd ${base-url}/${arch}/media/bootmgr bootmgr
initrd ${base-url}/${arch}/media/Boot/BCD BCD
initrd ${base-url}/${arch}/media/Boot/Fonts/segmono_boot.ttf segmono_boot.ttf
initrd ${base-url}/${arch}/media/Boot/Fonts/segoe_slboot.ttf segoe_slboot.ttf
initrd ${base-url}/${arch}/media/Boot/Fonts/wgl4_boot.ttf wgl4_boot.ttf
initrd ${base-url}/${arch}/media/Boot/boot.sdi boot.sdi
initrd ${base-url}/${arch}/media/sources/boot.wim boot.wim
boot || goto failed
goto start

:ubuntu-installer-amd64-remote
echo Starting Ubuntu 12.04 amd64 installer for ${initiator-iqn}
set base-url http://no.archive.ubuntu.com/ubuntu/dist...ller/amd64
kernel ${base-url}/linux
initrd ${base-url}/initrd.gz
#imgargs linux auto=true url=http://yourserver/some/path/preseed.cfg
boot || goto failed
goto start

:ubuntu-installer-i386-remote
echo Starting Ubuntu 12.04 i386 installer for ${initiator-iqn}
set base-url http://no.archive.ubuntu.com/ubuntu/dist...aller/i386
kernel ${base-url}/linux
initrd ${base-url}/initrd.gz
#imgargs linux auto=true url=http://yourserver/some/path/preseed.cfg
boot || goto failed
goto start

:xenclient-install
echo Booting XenClient 2.1 installer for ${initiator-iqn}
# XenClient doesn't seem to support installing to iSCSI volumes
# It only supports installing using iBFT
#set root-path ${base-iscsi}:${hostname}.boot.xenclient
#sanhook ${root-path} || goto failed
# The xenclient-2.1 folder is just the unpacked contents of the installer ISO
# Make sure you modify the isolinux.cfg and point it at your answer file URL
# You can find an example of the answer file in the "Setup and Usage Guide"
set 210:string ${boot-url}/xenclient-2.1/isolinux/
set 209:string isolinux.cfg
set filename ${210:string}pxelinux.0
chain ${filename} || goto failed
goto start

###################### LIVE ENVIRONMENT MENU ########################

:menu-live
menu Live environments for ${initiator-iqn}
item openelec-generic-live Boot OpenELEC Generic 2.0.0 i386
item openelec-intel-gma-live Boot OpenELEC Intel GMA 2.0.0 amd64
item ubuntu-live-1204-amd64 Boot Ubuntu LiveCD 12.04 amd64
item ubuntu-live-1204-i386 Boot Ubuntu LiveCD 12.04 i386
item mythbuntu-live-1204-amd64 Boot Mythbuntu LiveCD 12.04 amd64
item mythbuntu-live-1204-i386 Boot Mythbuntu LiveCD 12.04 i386
item slitaz-live Boot SliTaz 4.0 LiveCD
item smartos Boot SmartOS
item smartos-pre-ept Boot SmartOS (pre-ept)
item kms-test Boot KMS test kernel
item
item --key x back Back to top menu...
iseq ${menu-default} menu-live && isset ${submenu-default} && goto menu-live-timed ||
choose selected && goto ${selected} || goto start
:menu-live-timed
choose --timeout ${submenu-timeout} --default ${submenu-default} selected && goto ${selected} || goto start

:openelec-generic-live
# Config from: http://wiki.openelec.tv/index.php?title=...Boot_-_NFS
# and http://wiki.openelec.tv/index.php?title=..._.28PXE.29
echo Booting OpenELEC Generic 2.0.0 i386 for ${initiator-iqn}
set base-url ${boot-url}/openelec-generic-i386-2.0.0
kernel ${base-url}/target/KERNEL
initrd ${base-url}/target/SYSTEM
# NFS/NBD/iSCSI boot support only works on v2 of OpenELEC
# The NFS server must be specified as an IP, name resolution doesn't work Sad
imgargs KERNEL ip=dhcp boot=NFS=10.1.1.10:/raid/boot/openelec-generic-i386-2.0.0/target disk=NFS=10.1.1.10:/raid/misc/openelec-storage/ overlay
boot || goto failed
goto start

:openelec-intel-gma-live
# Config from: http://wiki.openelec.tv/index.php?title=...Boot_-_NFS
# and http://wiki.openelec.tv/index.php?title=..._.28PXE.29
echo Booting OpenELEC Intel GMA 2.0.0 amd64 for ${initiator-iqn}
set base-url ${boot-url}/openelec-intel-amd64-2.0.0
kernel ${base-url}/target/KERNEL
initrd ${base-url}/target/SYSTEM
# NFS/NBD/iSCSI boot support only works on v2 of OpenELEC
# The NFS server must be specified as an IP, name resolution doesn't work Sad
imgargs KERNEL ip=dhcp boot=NFS=10.1.1.10:/raid/boot/openelec-intel-amd64-2.0.0/target disk=NFS=10.1.1.10:/raid/misc/openelec-storage/ overlay
boot || goto failed
goto start

:ubuntu-live-1204-amd64
# See http://manpages.ubuntu.com/manpages/onei...per.7.html for casper cmdline details
echo Booting Ubuntu Live 12.04 amd64 for ${initiator-iqn}
set base-url ${boot-url}/ubuntu-12.04-dvd-amd64
kernel ${base-url}/casper/vmlinuz
initrd ${base-url}/casper/initrd.lz
imgargs vmlinuz root=/dev/nfs boot=casper netboot=nfs nfsroot=10.1.1.10:/raid/boot/ubuntu-12.04-dvd-amd64 locale=en_US.UTF-8 keyboard-configuration/layoutcode=no mirror/country=NO
boot || goto failed
goto start

:ubuntu-live-1204-i386
# See http://manpages.ubuntu.com/manpages/onei...per.7.html for casper cmdline details
echo Booting Ubuntu Live 12.04 i386 for ${initiator-iqn}
set base-url ${boot-url}/ubuntu-12.04-dvd-i386
kernel ${base-url}/casper/vmlinuz
initrd ${base-url}/casper/initrd.lz
imgargs vmlinuz root=/dev/nfs boot=casper netboot=nfs nfsroot=10.1.1.10:/raid/boot/ubuntu-12.04-dvd-i386 locale=en_US.UTF-8 keyboard-configuration/layoutcode=no mirror/country=NO
boot || goto failed
goto start

:mythbuntu-live-1204-amd64
# See http://manpages.ubuntu.com/manpages/onei...per.7.html for casper cmdline details
echo Booting Mythbuntu Live 12.04 x64 for ${initiator-iqn}
set base-url ${boot-url}/mythbuntu-12.04-desktop-amd64
kernel ${base-url}/casper/vmlinuz
initrd ${base-url}/casper/initrd.lz
imgargs vmlinuz root=/dev/nfs boot=casper netboot=nfs nfsroot=10.1.1.10:/raid/boot/mythbuntu-12.04-desktop-amd64 locale=en_US console-setup/layoutcode=no
boot || goto failed
goto start

:mythbuntu-live-1204-i386
# See http://manpages.ubuntu.com/manpages/onei...per.7.html for casper cmdline details
echo Booting Mythbuntu Live 12.04 x86 for ${initiator-iqn}
set base-url ${boot-url}/mythbuntu-12.04-desktop-i386
kernel ${base-url}/casper/vmlinuz
initrd ${base-url}/casper/initrd.lz
imgargs vmlinuz root=/dev/nfs boot=casper netboot=nfs nfsroot=10.1.1.10:/raid/boot/mythbuntu-12.04-desktop-i386 locale=en_US console-setup/layoutcode=no
boot || goto failed
goto start

:slitaz-live
echo Booting SliTaz 4.0 LiveCD for ${initiator-iqn}
set base-url ${boot-url}/slitaz-4.0/
kernel ${base-url}/boot/bzImage
initrd ${base-url}/boot/rootfs4.gz
initrd ${base-url}/boot/rootfs3.gz
initrd ${base-url}/boot/rootfs2.gz
initrd ${base-url}/boot/rootfs1.gz
imgargs bzImage rw root=/dev/null vga=normal autologin lang=en_US kmap=no-latin1
boot || goto failed
goto start

:smartos
echo Starting SmartOS for ${initiator-iqn}
# Hook zones drive (optional)
set root-path ${base-iscsi}:${hostname}.boot.smartos
sanhook ${root-path} ||
# See http://nahamu.github.com/2011/08/17/smartos-pxe.html for details
set base-url ${boot-url}/smartos/platform/i86pc
kernel ${base-url}/kernel/amd64/unix
module ${base-url}/amd64/boot_archive
# See http://wiki.smartos.org/display/DOC/Gett...th+SmartOS
# smartos=true to run zpool "installer" (and disable noimport=true)
imgargs unix -v -B console=text,standalone=true,noimport=true,keyboard-layout=norway,root_shadow='$1$RKv<your-encrypted-password-here>eQCWk.'
#imgargs unix -v -B console=text,standalone=true,smartos=true,keyboard-layout=norway,root_shadow='$1$RKv<your-encrypted-password-here>eQCWk.'
boot || goto failed
goto start

:smartos-pre-ept
echo Starting SmartOS (pre-ept branch) for ${initiator-iqn}
# See http://nahamu.github.com/2011/08/17/smartos-pxe.html for details
# pre-ept image downloaded from http://alpha.sysmgr.org/smartos-20120223-jmc2.iso
# Posted by LeftWing on #illumos / FreeNode at 2012-04-11 09:09 UTC+2
set base-url ${boot-url}/smartos/pre-ept/platform/i86pc
kernel ${base-url}/kernel/amd64/unix
module ${base-url}/amd64/boot_archive
imgargs unix -v -B console=text,standalone=true,noimport=true,root_shadow='$1$RKv<your-encrypted-password-here>eQCWk.'
boot || goto failed
goto start

:kms-test
echo Booting KMS-enabled Linux kernel for ${initiator-iqn}
set base-url ${boot-url}/kms_test
kernel ${base-url}/vmlinuz
initrd ${base-url}/initrd ||
imgargs vmlinuz rw root=/dev/nfs nfsroot=nas.smidsrod.lan:/raid/kms_test ip=dhcp ||
boot || goto failed
goto start


IS THERE SOMETHING WRONG OR I MISS SOMETHING?
PLEASE LET ME KNOW CAUSE I AM A NEW BIE..

THANKS
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
problem with iscsi via nas - whisper74 - 2013-04-30 19:58



User(s) browsing this thread: 1 Guest(s)