Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Booting via iSCSI to Debian7 on HP Server BL495c G5
2013-12-29, 20:28
Post: #3
RE: Booting via iSCSI to Debian7 on HP Server BL495c G5
After changing Blade Number 2 (boots), with Blade 3 (not booting). The Surprise was, that the before not booting Blade 3 now boots in the Slot of number 2.
And Number 2 in Slot Number 3 is not booting anymore....
So, it doesn't have to do with the Blades it self.
The Bladecenter is working with the VirtualConnect Technology.
Now i switched the Booting Lan from eth1 to eth0.
After that change in the Virtualconnect Manager, all Blades are booting now.

It seems that there is a Problem in the VC when booting from eth1.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Booting via iSCSI to Debian7 on HP Server BL495c G5 - Axel.Walsleben - 2013-12-29 20:28



User(s) browsing this thread: 1 Guest(s)