Post Reply 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Issues with Autoboot
2016-03-18, 20:01
Post: #1
Issues with Autoboot
I am trying autoboot command and getting following failure.

autoboot is working fine 3-4 time (Each time I pressed Ctrl +c during copy operation , started "autoboot net1" to restart the operation) and after that, its giving following error.

How Can I debug this issue.

iPXE> autoboot net1
net1: 00:22:12:df:ff:37 using dh8900cc on PCI0f:00.2 (open)
[Link:up, TX:880268 TXE:26 RX:885485 RXE:338]
[TXE: 15 x "Operation canceled ("]
[TXE: 11 x "Error 0x2a654089 ("]
[RXE: 182 x "The socket is not connected ("]
[RXE: 122 x "Operation not supported ("]
[RXE: 1 x "The socket is not connected ("]
[RXE: 18 x "Error 0x440e6083 ("]
Configuring (net1 00:22:12:df:ff:37).................. ok
net0: fe80::222:12ff:fedf:ff36/64 (inaccessible)
net0: 2001:db8:185::/48 gw fe80::213:5fff:fe21:d74a (no address) (inaccessible)
net1: gw
net1: fe80::222:12ff:fedf:ff37/64
net2: fe80::222:12ff:fedf:ff38/64 (inaccessible)
net3: fe80::222:12ff:fedf:ff39/64 (inaccessible)
Next server:
Filename: Connection timed out (
Find all posts by this user
Quote this message in a reply
Post Reply 

User(s) browsing this thread: 1 Guest(s)